User manual TASCAM DVW/D11A

[. . . ] 1x1 DVD Duplicator User's Manual DVW-D11 DVW-D11H ® Safety Precautions TEAC DVD Duplicator systems are high-precision electronic devices. Do not use them in any manner other than as specified in this manual. Please read this manual in its entirety before you begin the installation procedure. Use of controls, adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure. [. . . ] 9. 6 Image Src Drive Use the Image Src Drive function to select the DVD-ROM drive or the DVD Writer drive as the source from which you can load data into a particular partition as an image file. TEAC DVD Duplicator User's Manual 15 9. 7 Image Format Info 9. 7 Image Format Info The partitions on the hard disk drive can be configured to store a CD (1GB), DVD (5GB), or a Double Layer (DL) (10GB) image. The factory partitions the hard disc drive for DVD images at (5GB per partition). Use the Image Format Info function to verify this setting. 10. Edit Track (for CD only) The Edit Track functions enable you to create and copy a collection of songs from different audio discs. Note: The CD+G value must be set to OFF before you can use the Track Extraction feature. For more information, refer to "12 Advanced Setup (Adv Setup)" on page 19. 10. 1 CD to CD Edit The CD to CD Edit function enables you to select specific tracks from various audio discs, combine them to create a collection of songs, and copy the collection to blank CD-R/CD-RW discs. Note: CD-R discs support up to 80 minutes of audio. Therefore, the number of tracks that can be copied onto a single disc depends on the length of each individual track. 10. 2 CD to HDD The CD to HDD function enables you to select one or more tracks from an audio CD-ROM disc and copy them to a specific partition on the hard disk drive. Note: CD-R discs support up to 80 minutes of audio. Therefore, the number of tracks that can be copied onto a single disc depends on the length of each individual track. 10. 3 Play Audio Track This function enables you to use the designated source drive as a music CD player. If the DVD-ROM drive does not feature a headphone jack, change the source drive designation to the DVD-RW drive using function [8 Select Source] (see page 14. ) You can connect standard multimedia speakers to the audio jack of the designated source drive. The volume knob on the front of the drive controls the audio volume level. The arrow buttons on the LCD panel enable you to skip to the next track (forward or back). 16 TEAC DVD Duplicator User's Manual 10. 4 Close Session 10. 4 Close Session This function finalizes your CD-R disc. Once the CD-R disc is finalized, no more audio can be added to that disc. 11 Setup The Setup menu includes a list of options that enable you to change the original default configuration. Various settings are available under the Setup menu that control the operation of the DVD Duplicator. However, TEAC recommends that you use the original default settings for optimal operation. 11. 1 Language The DVD Duplicator LCD panel can display text in English and Spanish. The Language function enables you to select the display language. 11. 2 CD Burn Speed The CD Burn Speed setting controls the writing speed of the target drive when recording onto CD-R/CD-RW media. [. . . ] Damage resulting from modification or attempted modification of product not authorized by TEAC. Damage resulting from causes other than product defects, including lack of technical skill, competence, or experience of the user. Damage to any unit that has been altered or on which the serial number has been defaced, modified or removed. Damage or malfunction resulting from installation and cabling. [. . . ]