User manual TASCAM GIGAPULSE VST

[. . . ] GigaPulseTM User Guide Contents Quick Start-Loading & Adjusting GigaPulse GigaPulse Interface: 19 GigaPulse Pro (GigaStudio 3. 0) Interface 19 GigaPulse VST Interface File Menu: 49 19 10 GigaPulse Configuration Window: 74 GigaPulse Pro Signal Flow 89 GigaPulse VST Signal Flow 89 GigaPulse SP 110 GigaPulse Banks 112 126 128 156 GigaPulse File Formats Impulse Builder-Main Window Mic Placement Position/Orientation: Source Placement Editor 165 Source and Mic Placement-Advanced Options Impulse Attributes Editor 190 183 1 GigaPulseTM User Guide GigaPulse Quickstart 2 GigaPulse Quick Start Quick Start-Loading & Adjusting GigaPulse Load GigaPulse: There are two ways to load gigapulse. For GigaPulse VST, consult your DAW software documentation on how to use VST plugins. (Some host applications allow you to insert VST FX on a mixer channel strips) Once GigaPulse VST is up and running, it works nearly identical to GigaPulse Pro. (The GigaStudio 3. 0 built in version) For GigaPulse Pro, assign an instrument to a MIDI channel. Then route that channel to a pair of inputs on the DSP Station mixer. [. . . ] Go to the MIDI channel page to load an instrument. To bring up the MIDI mixer pane, click the MIDI Mixer button at the top of the screen. You can also select the MIDI Mixer from the View menu. (Or Ctrl+M on the keyboard. ) 85 GigaPulseTM User Guide GigaPulse-Pro Signal Flow 86 GigaPulse-Pro Signal Flow For this lesson purposes, load an instrument to MIDI channel-1 on Port-1 and make sure you can play the instrument with your keyboard or through your sequencer. Port 1 Selected: Instrument Loaded on MIDI Channel 1: To the right of the MIDI channel, locate the Mixer Input dropdown menu. Use the dropdown to assign the Mixer Input. For now, set it to Inputs 1, 2 if its not there already. Next, bring up the DSP Station. (The GigaStudio Mixer) Click on the DSP Station button at the top of the screen to bring up the mixer. You can also select the DSP Station from the View menu. (Or Ctrl+D on the keyboard. ) 86 GigaPulseTM User Guide GigaPulse-Pro Signal Flow 87 GigaPulse-Pro Signal Flow Select Channel 1, 2 in the mixer. At the top of each channel pair is a little right-pointing triangle next to the channel numbers. By clicking on the triangle, that channel pair can be changed to Wide Channel View. Note that the triangle points to the left once the channel is expanded. Click on it again to return to the Narrow Channel View. 87 GigaPulseTM User Guide GigaPulse-Pro Signal Flow 88 GigaPulse-Pro Signal Flow Now assign GigaPulse Pro NFX to the first insert in Channel 1, 2 Click on the drop down arrow in top empty slot in the inserts pane, then Native Plugins (NFX), and finally GigaPulse Pro NFX. This will insert the GigaPulse Pro GigaPulse Pro NFX In the Insert. This brings up the GigaPulse interface. 88 GigaPulseTM User Guide GigaPulse-Pro Signal Flow 89 GigaPulse-Pro Signal Flow In the Acoustic Space Pane, click the drop down arrow under Bank to select a room for its characteristics. Large halls are better for music, and small rooms are better for voice. Play the instrument and see how the GigaPulse sounds on it. Take a look at the Mic to Mixer Routing section. The default arrangement is as shown, with the Front Left Microphone sending it's signal to Output 1, the Front Left to Output 2, and so on, but all seven microphones can be assigned to any output desired. Notice how numbers from left to right go from 1-7. These numbers literally mean mixer channels 1-7. The mic positions on the left will be routed directly to the mixer channel they are assigned. Just click on the buttons to assign the mic positions. Any mic position can be routed to any mixer channel here. [. . . ] This description is not displayed in GigaPulse interface. 184 GigaPulseTM User Guide Impulse Builder-Attributes 185 Impulse Builder-Attributes Tail Extension: GigaPulse can tail extend impulse of 65536 samples or longer. (Roughly 3 seconds) All items in this group are disabled unless your impulse set size is at least this size or larger. If your sample size is less than this, you can select 65536 and GigaPulse will automatically extend and zero fill your impulse to accommodate it. These settings will be automatically set in the GigaPulse interface when this IIS set is loaded. Tail Extension Enable: You must check this box to enable tail extension 185 GigaPulseTM User Guide Impulse Builder-Attributes 186 Impulse Builder-Attributes Overlap-Level-Cutoff: Overlap Control ­ Has a minimum/maximum span of 0-127. [. . . ]