User manual TASCAM MD-CD1MKIII

[. . . ] D01142520A MD-CD1@$ Minidisc Deck/CD Player OWNER'S MANUAL IMPORTANT SAFETY PRECAUTIONS The labels required in this regulation are shown at 1 and 2. 2 1 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 21503-W WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. [. . . ] Settings can be made independently for each deck. The level can be set between ­72 dB and ­24 dB in 6 dB increments. NOTE If a point which does not exist is selected, setting operation will be cancelled. Operation variations Even if the final second is not input, playback will begin from the selected point after pressing the PLAY button. Or, if you press the READY button, the unit will enter the playback standby mode at the selected point. Track search This is explained in the "Specifying by track number" part of "Track selection" on page 27. After inputting the three-digit track number, press the PLAY button to begin playback of that track, or the READY button to cue the track and enter playback standby mode. Specifying to the minute After inputting the three-digit track number and the number of minutes after the start of the track, press the PLAY button to begin playback of that track, or the READY button to cue the track and enter playback standby mode. Example: To specify 1 min 00 sec from the start of track 2, input "002 001. " When the Auto Cue point is being searched, the Á arrow flashes in the display, and audio output is muted. Auto Ready When the Auto Ready function is on, after each track is played, playback standby mode is entered at the start of the next track. Even when the Skip function is used to skip tracks, playback standby mode is entered at the start of the selected track. NOTE When the Auto Cue function is also on, playback standby mode is entered at the start of the sound on the selected track, and not the beginning of that track. 28 TASCAM MD-CD1MKIII 7 ­ CD and MD Playback Turning the Auto Ready function on and off Press the AUTO READY button on the remote control to turn the function of display master on and off. option on the PLAY sub-menu of the MD menu or CD menu to turn the Auto Ready function on and off for each deck. (Default position: OFF) When the Auto Ready function is on, A. READY is lit on the display. Even when the power is turned off, the Auto Ready setting is maintained. Continuous CD and MD playback With this function, when one deck finishes, the other deck begins play. 1 Turn on the CONT PLAY switch on the front panel. When the disc finishes playback, the disc in the other deck begins playing automatically. When that disc finishes, the first disc is played again, and the playback cycle continues. NOTE Repeat playback Press the REPEAT button on the remote control to turn on the Repeat mode. In this mode, all the tracks on the disc are played continuously. During playback, if the Repeat mode is turned on, playback continues as before, and when the last track finishes, playback resumes from the first track. If Repeat mode is turned on when the deck is stopped, press the PLAY button to begin operation. option in the PLAY submenu of the MD and CD menus to turn the Repeat mode on and off for each deck. Combining the Repeat mode with the Program, Singletrack playback and Random playback functions will enable Program Repeat, Single-track Repeat and Random Repeat operations, respectively. · During Continuous Play, the deck currently in playback automatically becomes the display master. · When the Repeat Mode is turned on, Repeat playback is performed instead of continuous playback. That is, Repeat Mode has priority over the Continuous Play function. To cancel Continuous Play operation, press the STOP button. Timer Playback By using an external timer, you can set the MD-CD1MKIII to play the loaded disc automatically when the unit is turned on by the timer. [. . . ] · The MD disc is set to write protect. Slide the tab on the cartridge to the closed position and try again. · Confirm the connections with the audio system. · The disc may be for playback only. [. . . ]