User manual TASCAM RC-F82

[. . . ] D01132420A RC-F82 Fader Unit OWNER'S MANUAL ª For U. S. A. TO THE USER This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. [. . . ] Press this key when in recording standby to start recording. This functions in the same way as the PLAY [CALL] key on the HS-P82 unit except it lacks a LED indicator. h PAUSE key/indicator CAUTION The same adjustments can be made using both this unit and the HS-P82. The adjustments made most recently will be used, regardless of which unit they were made with. For this reason, if you make an adjustment using the HS-P82 unit, the setting will differ from that last made using controls on this unit. j REC key/indicator a Ô/Â [MARK Â] key When stopped/in playback standby/during playback: · Press briefly to skip to the beginning of the current take (file) or the previous file, and stop/ continue playback standby/resume playback at the beginning of that take (file). · Press to search backwards while pressing. · Press this key while pressing the SHIFT key to move to the previous mark, and stop/continue playback standby/resume playback. This functions in the same way as the Ô [Â] key on the HS-P82 unit. This key works just like a shift key on a computer. It works with other keys on this unit that have blue labels. There are two SHIFT keys--one at the top left and one at the bottom right--but they have the same function. When stopped/in playback standby/during playback: · Skip to the beginning of the next take (file), and stop/continue playback standby/resume playback at the beginning of that take (file). · Press to search forward while pressing. · While pressing the SHIFT key, press this key to move to the next mark, and stop/continue playback standby/resume playback. This functions in the same way as the [¯] key on the HS-P82 unit. Press this key to add a mark at the current time. The maximum number of marks, including automatic marks, possible in a single file (take) is 99. k PLAY [CALL] key s SHIFT key d /¯ [MARK] ¯ key f MARK key 8 TASCAM RC-F82 2 ­ Names and Functions of Parts Rear panel l LINE IN connectors (left and right) These are balanced XLR analog input connectors (1: GND, 2: HOT, 3: COLD). Connect them with the HS-P82 LINE OUT connectors. x RETURN IN connectors (1/2) ; LINE OUT 1 connectors (left and right) These are balanced XLR analog output connectors (1: GND, 2: HOT, 3: COLD). The signals input through the LINE IN connectors (left and right) are passed through and output from these. These are balanced XLR (left and right) analog output connectors (1: GND, 2: HOT, 3: COLD). When the TO LINE OUT 2 switch is set to OFF, the signal input through the LINE IN connectors are passed through and output from these. When the TO LINE OUT 2 switch is set to ON, the talkback signal is output from these connectors. These are balanced XLR analog input connectors (1: GND, 2: HOT, 3: COLD). Use these connectors for the input of talkback signals. [. . . ] Using the HS-P82 unit, select the take that you want to play back. Press the PLAY [CALL] key to start playback of that take. Press the STOP [RETAKE] key to stop playback. The PAUSE key lights when playback is paused. [. . . ]