User manual TASCAM RC-HS20PD

[. . . ] 7 3 ­ Preparations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Connecting to an HS-8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Attaching the ferrite core to the HS-8 power cable 8 Using the HS-8 SIGNAL GND terminal . . . . . . . . . . . . . . . . . . . . . . . . . 8 Setting the HS-8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 ­ Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Normal playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Should this happen, leave the unit for one or two hours before turning the unit on. Cleaning the unit To clean the unit, wipe it gently with a soft dry cloth. Do not wipe with chemical cleaning cloths, benzene, paint thinner, ethyl alcohol or other chemical agents to clean the unit as they could damage the surface. 4 TASCAM RC-HS20PD 2 ­ Names and Functions of Parts Top panel 1 Speaker Use this speaker for monitoring. When headphones are connected to the PHONES jack, no sound is output from the speaker. 2 HOME key This opens the Home Screen and has the same function as the HOME key on the HS-8. 3 MENU key This opens the MENU screen and has the same function as the MENU key on the HS-8. 4 PROJECT key This opens the PROJECT screen and has the same function as the PROJECT key on the HS-8. 5 Color display This 3. 5-inch TFT color display with 320 x 240 resolution is touch sensitive. This display shows the same information and operates the same way as the color display on the main unit. 6 EXIT/CANCEL [PEAK CLEAR] key Use this to cancel input and the selection of items. This has the same function as the EXIT/CANCEL key on the HS-8. 7 DATA dial Turn to use as a DATA dial, and press to use as an ENTER key. This has the same function as the DATA dial on the HS-8. Turn the dial while pressing and holding the HOME key to adjust the brightness of the color display, the PAUSE, PLAY, flash playback (1­20) and ON LINE keys, and the STOP and FADER START indicators. Push and turn the DATA dial while pressing and holding the HOME key to adjust only the brightness of the color display. 8 FADER START key/indicator Press to turn the fader start function ON/OFF. When ON, the indicator above the key lights. 9 PHONES jack Connect stereo headphones to this standard stereo phone jack that outputs the monitoring signal. CAUTION Before connecting headphones, turn the LEVEL knob to the minimum volume. Failure to do so could cause sudden loud noises to occur, which might damage your hearing or equipment. TASCAM RC-HS20PD 5 2 ­ Names and Functions of Parts 0 LEVEL knob Use this to adjust the output level sent to the speaker or headphones connected to the PHONES jack. q ON LINE key/indicator Switch on line playback mode ON/OFF. In order to use on line function, you must also set the HS-8. (See "Activating online playback mode" of "9 ­ Online functions" in the HS-8 Owner's Manual. ) w STOP key/indicator Press to stop playback. When stopped, the indicator above it lights. e PAUSE key/indicator Press this key during playback or when stopped to put the unit in playback standby. [. . . ] 8 If you press the flash playback key for a take other than the one currently playing, the take that corresponds to that key starts playing. If that take has been flash-loaded, it will start playing immediately (flash playback). If the take has not been flash-loaded, it will start ordinary playback. When a track has been paused by lowering the fader (fader stop), if another take is selected using a flash playback key, that take is put into playback standby at its beginning. Raising the fader starts playback. Turning on line playback mode on/off When the online function is activated, pressing the ON LINE key turns the on line playback mode on/off. [. . . ]