User manual TASCAM SX-1OS 50 FINAL RELEASE NOTES

[. . . ] SX1OS V1. 50 Final Release Notes This document contains additional information and corrections that did not make it into the manual in time. Manual corrections Mixer 13: The SX-1 does not post the progress bar for single undo and redo operations, only for multiple operations, like when an item in the VGA history list is double clicked on directly. VGA 11: The MIDI Activity described, where the MIDI icon blinks the keyboard note, is only active when the slot Input Monitor is ON. VGA 13: Note that the SX-1 does not support double clicking on MIDI events in the upper track region to open the event editor, only MIDI events in the piano roll. [. . . ] First Select a region of time, the begin and end registers are used for this operation. >From the keyboard, press alt+shift+S. or From the VGA, click on the Edit Menu, "Select Time" entry. or From the front surface, press and hold SHIFT, then press SELECT in the EDITING section. Pressing and holding the front panel CANCEL button followed by the SELECT button in the EDITING section will unselect all events and tracks. If SHIFT and CANCEL are both pressed, then the above "Select Time" function will still be invoked. Clip duration display On the VGA display on the track screen clip browser and clip import panes, the SX-1 shows detailed information about the currently selected clip. Prior to V1. 50, the "Length" time field was calculated from the clip length and the current project sample rate. There is also a field that shows the original sample rate of the clip, so in V1. 50 the Length field has been split into two items, one where the time duration is calculated from the clip's original sample rate -> "Clip Length", and one where the time duration is calculated from the current project's sample rate -> "Project Length". These values will only differ when the clip's sample rate is different from the current project's rate. TASCAM SX1OS V1. 50 Final Release Notes 1 SX1OS V1. 50 Final Release Notes Tips and Hints Sync Point Editing The V1. 00 Reference manual does not give a full explanation of the uses for the sync point. The Sync Point belongs in the set of region selection registers, which are Begin, End and Sync. When a region of time is first selected, the sync point is set to be the same as the begin point. Whenever the selected data is pasted, the data is placed so that the sync point of the data on the clipboard is positioned at the currently marked begin point. In most cases, the sync point is the same as begin point, so the pasted data appears to the right of the current begin point. Changing the sync point to the end of the selection before pressing COPY or CUT allows the user to paste the data so that it ends at the currently marked begin point. Or, any point in-between or even outside the selection can be marked as the SYNC point. [. . . ] Workaround: This does not affect all users in this situation, but if it does occur, then no workaround has been found. "Incorrect OS for this Hardware" error message If an SX-1 displays this message on startup, this indicates a hardware incompatibility with the new OS. Workaround: Contact Tascam to have your SX-1 serviced. TASCAM SX1OS V1. 50 Final Release Notes 2 [. . . ]