User manual TASCAM US-122MKII

[. . . ] D01087920A US-122@# USB 2. 0 Audio/MIDI Interface OWNER'S MANUAL IMPORTANT SAFETY PRECAUTIONS For U. S. A. TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Do not connect the US-122MKII to your computer before you have installed the driver. CAUTION · Handle the enclosed CD-ROM with care. If the disc becomes scratched or dirty, your computer may be unable to read it and the software cannot be installed. If the disc becomes unreadable, a fee will be charged for its replacement. · Never attempt to play the enclosed CDROM in a conventional audio CD player, as the resulting noise may damage your speakers or your hearing. 12 TASCAM US-122MKII 3 ­ Installation Installing the driver for Windows NOTE · During driver installation, a warning that "this software . . . has not passed Windows Logo testing" will appear. If this message appears, click Continue to proceed with the installation. · During installation, you must connect, disconnect and reconnect the unit in steps 7, 8 and 9. You should complete each of these installation steps in less than one minute. Installation may fail if you take too much time. 5 Click the "Install the driver" button when the screen below appears. 1 Confirm that the unit and the PC are not connected by the USB cable. 2 Insert the included driver installation CD-ROM into the PC where you will install it. 3 Click the "Install Driver" button when the screen below appears. (If this sreen does not appear automatically, find and open the "Autorun2. exe" program on the driver CD-ROM. ) 6 Read the contents of the License Agreement, and select "I accept the agreement" if you agree to the terms. Next, click the "Install" button to start installation. 7 When the screen below appears, use the supplied USB cable to connect the unit to the PC. 4 When the language selection screen (below) appears, select the language you prefer and then click the "OK" button. TASCAM US-122MKII 13 3 ­ Installation 8 When the screen below appears, unplug the connecting USB cable from the unit or the PC. 11 When the screen below appears, the installation is complete. Click the "Reboot now" button to restart the PC to use the driver. 9 When the screen below appears once more, reconnect the unit and the PC with the USB cable. 11 After the PC has restarted, open the TASCAM US-122 MKII / US-144 MKII (Start > Control Panel) or US-122 MKII & US-144 MKII Control Panel (Start > All Programs > TASCAM). If the Driver Version, Device and other data appear correctly, the installation has succeeded. 14 TASCAM US-122MKII 3 ­ Installation Installing the driver for Mac OS X 1 Confirm that the US-122MKII is not connected to the computer. 2 Double-click the "US-122MKII_US144MKII_1. 14. dmg" on the included CD-ROM. The "TASCAM_US122MKII_US-144MKII_1. 14. mpkg" is created on the desktop. 3 Dboule-click the "TASCAM_US122MKII_US-144MKII_1. 14mpkg" on the desktop to launch the installer. 4 Follow the instructions on the screen to conduct the installation. 5 Restart the computer and then connect the unit. · Using Windows "Add or Remove Programs" 1 Open the "Control Panel" from the "Start" menu. [. . . ] The load on the computer causes sound to break up and noise to occur. Methods to reduce the load on the computer are introduced below. 1) If a wireless LAN, antivirus software and other software that run in the background are operating, they regularly put burdens on the computer, which can cause sound to break up and noise. Stop wireless LAN transmission, antivirus software and other software running in the background when using this unit. [. . . ]