User manual TASCAM US-200

[. . . ] D01139820A US-200 USB 2. 0 Audio/MIDI Interface OWNER'S MANUAL Before connecting this unit to a computer, you must install the dedicated driver from the included CD-ROM onto the computer. IMPORTANT SAFETY INFORMATION · Do not expose this apparatus to drips or splashes. · Do not place any objects filled with liquids, such as vases, on the apparatus. · Caution should be taken when using earphones or headphones with the product because excessive sound pressure (volume) from earphones or headphones can cause hearing loss. Declaration of Conformity Model Number: Trade Name: Responsible party: Address: Telephone number: US-200 TASCAM TEAC AMERICA, INC. 7733 Telegraph Road, Montebello, California, U. S. A. [. . . ] If the Driver Version, Device and other data appear correctly, the installation has succeeded. Installing the driver for Mac OS X 1 Confirm that the US-200 is not connected to the computer. 2 Double-click the TASCAM_US200_ Driver_1. 00. dmg on the included CD- 14 TASCAM US-200 3 - Installation ROM. The TASCAM_US200_1. 00. mpkg" is created on the desktop. mpkg on the desktop to launch the installer. 4 Follow the instructions on the screen to conduct the installation. 5 Restart the computer and then connect the unit. ª Mac OS X 1 Insert the CD-ROM into the computer, open TASCAM_US200_Driver_1. 00. dmg and double click TASCAM US-200 remover icon. Uninstalling the driver ª Windows There are two ways to uninstall the driver as shown below. Using the Installation CD-ROM: 1 Follow steps 1 to 4 under "Installing the driver and control panel for Windows" (See page 13. ) 2 At step 5 of the procedure, click Remove the driver. 2 Follow the instructions on the screen for the remaining procedure. Frequently asked installation questions and answers (FAQ) Windows driver installation Q: When I connect the unit to a computer, the Windows Hardware Wizard appears and I cannot install the driver. Am I making a mistake during the installation procedures?A: Close the Windows "Hardware Wizard" and disconnect the unit. You must install the driver before connecting this unit. Insert the CD-ROM included with the product. The menu for installing the driver appears automatically. 3 Follow the instructions on the screen for the remaining procedure. Using Windows "Add or Remove Programs" 1 Open the Control Panel from the Start menu. 2 Double click on Add or Remove programs. 3 Select US-200 driver from the list and click Change or Remove Programs. 4 Follow the instructions on the screen for the remaining procedure. Select Install Driver, and follow the instructions shown on the screen. If you have downloaded the driver from the TASCAM website (htt://tascam. com/), expand the ZIP archive, launch the setup. exe file, and follow the instructions on the screen. Q: I loaded the installation CD-ROM into a Windows computer, but the driver installation menu does not appear. A: The automatic playback settings for the disc drive might be disabled. TASCAM US-200 15 3 - Installation Open the supplied driver CD-ROM using Windows Explorer, and double-click the Autorun2. exe file to manually open the installation menu. Follow the procedures in "Installing the driver and control panel for Windows" on page 13 to install the driver. Improving computer performance In this manual, we will offer only the following basic tip to improve performance when using this unit. Processing digital audio places a considerable load on your computer. [. . . ] 3 Select Windows Vista Basic or any option other than Windows Aero. b) Performance settings 1 Right-click Computer and select Properties. 4 Click Settings in the Performance section. ª The sound breaks up or there is noise. The processing load on the computer can cause sound to break up and noise to occur. Some ways to reduce the load on a computer are introduced below. [. . . ]