User manual TASCAM US-600

[. . . ] D01140120B US-600 USB 2. 0 Audio/MIDI Interface OWNER'S MANUAL Before connecting this unit to a computer, you must install the dedicated driver from the included CD-ROM onto the computer. IMPORTANT SAFETY PRECAUTIONS FOR U. S. A. TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] · This unit is powered by the dedicated TASCAM PS-P520 AC adaptor. 3 Insert the included driver installation CD-ROM into the PC where you will install it. 4 Click the Install Driver button when the screen below appears. (If this screen does not appear automatically, find and open the Autorun2. exe program in the Autorun folder on the driver CD-ROM. ) AC outlet TASCAM PS-P520 DC plug 14 TASCAM US-600 3 - Installation 5 When the language selection screen (below) appears, select the language you prefer and then click the OK button. 8 When the screen below appears, use the supplied USB cable to connect the unit to the PC. 6 Click the Install the driver button when the screen below appears. 7 Read the contents of the License Agreement, and select I accept the agreement if you agree to the terms. Next, click the Install button to start installation. Computer USB 9 Installation of the driver proceeds. TASCAM US-600 15 3 - Installation 10 When the screen below appears, the installation is complete. Click the Reboot now button to restart the PC to use the driver. Installing the driver for Mac OS X 1 Confirm that the US-600 is not connected to the computer. 2 Double-click the TASCAM_US-600_ Driver_1. 00. dmg on the included CDROM. The TASCAM_US-600_1. 00. mpkg" is created on the desktop. mpkg on the desktop to launch the installer. 4 Follow the instructions on the screen to conduct the installation. 6 Plug the included AC adaptor (TASCAM PS-P520) into the DC IN 5V and confirm that the (standby/on) indicator on the front panel has lit. 11 After the PC has restarted, open the TASCAM US-600 (Start > Control Panel) or US-600 Control Panel (Start > All Programs > TASCAM). If the Driver Version, Device and other data appear correctly, the installation has succeeded. 7 Use the supplied USB cable to connect the unit to the computer. 16 TASCAM US-600 3 - Installation Uninstalling the driver ª Windows There are two ways to uninstall the driver as shown below. Using the Installation CD-ROM: 1 Follow steps 1 to 4 under "Installing the driver and control panel for Windows" (See page 14. ) 2 At step 5 of the procedure, click Remove the driver. Frequently asked installation questions and answers (FAQ) Windows driver installation Q: When I connect the unit to a computer, the Windows Hardware Wizard appears and I cannot install the driver. Am I making a mistake during the installation procedures?A: Close the Windows "Hardware Wizard" and disconnect the unit. You must install the driver before connecting this unit. Insert the CD-ROM included with the product. The menu for installing the driver appears automatically. Select Install Driver, and follow the instructions shown on the screen. If you have downloaded the driver from the TASCAM website (htt://tascam. com/), expand the ZIP archive, launch the setup. exe file, and follow the instructions on the screen. [. . . ] 4 Click Settings in the Performance section. 5 On the Performance Option screen, select the Adjust for Best Performance option. TASCAM US-600 ª The sound breaks up or there is noise. The processing load on the computer can cause sound to break up and noise to occur. Some ways to reduce the load on a computer are introduced below. [. . . ]