User manual TAURUS ALPATEC AC293

[. . . ] - The appliance's plug must fit into the mains socket Do not alter the plug. Not be made by children unless they are - Do not force the power cord. Never use the power Cord to lift up, carry or unplug the appliance. - Do not wrap the power cord around the appliance. [. . . ] - The plug must be easily accessible so it can be disconnected in an emergency. - To achieve the highest efficiency from the appliance it should be situated in a place where the atmospheric temperature is between 12 and 32ºC. Installation of window kit (included on the model AC 293 KT) - Partially open the window and then fix the window kit to the window. - The window kit can be installed on most of normal and vertical windows and it is adjustable. - Fix the other end of the heat-exhausted hose to the air-outlet window kit. - Do not add new sections to the extraction tube provided, as it could cause the appliance to malfunction. - The appliance should be used with its base feet fitted. - The appliance should be used with its wheels attached. Instructions for use Use: - Unroll the cable completely before plugging it in. - Press the ON/OFF button, the unit will enter in cooling mode with low fan speed. Assembly of the exhaust hose - Lengthen one head of the hose, and spin the exhaust hose into exhaust connector (counterclockwise). - Caution: Exhaust pipe is 60 cm~170 cm long (including adapter). - The length of exhaust pipe is especially designed in accordance with the specification of the air conditioner. Please do not use other exhaust pipes of different lengths or materials, in such way failure may be caused. Fan Speed - Under the cooling and the fan mode, the speed goes as follow: - Lower Fan Mid Fan-> High Fan. - Under the dehumidifying mode, fan is working in low speed. - Setting of timer off - When the air conditioner is running, press this button, the timer LED lamp is on, and meanwhile 88 Nixie tube will flicker " " for 5 times, at the moment, press UP and DOWN to adjust time from 0. Within 3h of timer, up/down adjustment once only changes 0. - When the set time expires, the air conditioner turns off automatically - Press Swing to turn off or turn on the up/down swing function. Setting timer on - When the air conditioner is in standby state, press TIMER, the timer LED lamp is on, and meanwhile 88 Nixie tube will flicker " " for 5 times, at the moment press UP/DOWN to adjust the desired time, and the method of adjustment is the same as that during timer off. - During setting of timer, the operating modes after start can be selected, if COOL mode is selected, the set temperature can be adjusted simultaneously. - If DEHUMIDIFY mode is selected, the set humidity can be adjusted simultaneously. [. . . ] Air filter cleaning: - Clean the air filters every 2 weeks. If the air filter is blocked with dust, the efficiency will reduce. - Pull out up and down filter as below pictures - Wash the air filters by immersing it gently into warm water with a neutral detergent, rinse it and dry it thoroughly in a shaded place. - Install air filters carefully after cleaning the filters. [. . . ]