User manual TAURUS GEYSER ECO 3000

[. . . ] Children should be supervised to ensure that they do not play with the appliance. - Do not use the appliance if it has been dropped, if there are visible signs of damage or if it has a leak. - The temperature of the accessible surfaces may be high when the appliance is in use. - If the mains connection is damaged, it must be replaced. [. . . ] - Turning the thermostat control to the minimum (MIN) setting does not guarantee that the iron is switched off completely. SERVICE: - Make sure that the appliance is serviced only by specialist personnel, and that only original spare parts or accessories are used to replace existing parts/accessories. - Misuse or failure to follow the instructions may be dangerous and renders the manufacturer’s guarantee null and void. iNSTRUCTIONS FOR USE BEFORE USE: - Peel off appliance’s protective film. - Make sure that all the product’s packaging has been removed. - Some parts of the appliance have been lightly greased, consequently, the appliance may give off a light smoke the first time it is used. After a short time, this smoke will disappear. - Prepare the appliance according to the function you wish to use: FILLING WITH WATER: - It is essential to have filled the tank with water to be able to work with steam. - Fill the tank, taking care to respect the MAX level (Fig. USE: - Unroll the cable completely before plugging it in. - Turn the thermostat control to the desired temperature position. - Do not use temperatures higher than those indicated on the garments to be ironed. (Minimum temperature for ironing with steam) ●●● Temperature for cotton. - If garment has various kinds of fibres, select the temperature for the fibre that requires the lowest temperature. (For example, select the temperature for polyester for a fabric made out of 60% polyester and 40% cotton). - Wait until the pilot light (F) has gone out, indicating that the appliance has reached an adequate temperature. - During use the pilot light (F) will automatically flash on and off, indicating that the heating elements are operating in order to maintain the desired temperature. DRY IRONING: - The appliance has a steam flow regulator which, when set to 1, allows dry ironing (without steam). STEAM IRONING: - It is possible to iron with steam whenever the tank has water and the adequate temperature is selected. STEAM FLOW CONTROL: - The appliance has a (C) control knob for adjusting the steam flow. SPRAY: - The spray can be used in both steam and dry ironing. - Press the spray button ( A ) to use this operation. [. . . ] - Unplug the appliance and place it in the sink. - Press and hold the self-clean button. - Let the water flow out through the steam vents in the base, while lightly shaking the appliance. - Release the button after a minute or when the tank becomes empty. [. . . ]