User manual TAURUS HOME AC 280

[. . . ] - The appliance requires suitable ventilation in order to work properly. Leave a space of 50cm between walls or other obstacles - Do not cover or obstruct the sides of the appliance, and leave a minimum space of 50cm front other walls, ceiling. - Ensure that the voltage indicated on the rating label matches the mains voltage before plugging in the appliance. - Connect the appliance to a base with an earth socket withstanding a minimum of 10 amperes. [. . . ] - Any misuse or failure to follow the instructions for use renders the guarantee and the manufacturer’s liability null and void. Installation - Be sure to remove all packaging material from inside the appliance. - Respect the legal provisions concerning safety distances from other elements such as pipes, electrical connections, etc. - Ensure that the appliance is level with respect to the floor. - The appliance requires suitable ventilation in order to work properly. Leave a space of 50cm between walls or other obstacles. (Fig 1) - Do not cover or obstruct any of the openings of the appliance. - Do not cover or obstruct the sides of the appliance, and leave a minimum English space of 50cm front other walls, ceiling. - The plug must be easily accessible so it can be disconnected in an emergency. - To achieve the highest efficiency from the appliance it should be situated in a place where the atmospheric temperature is between 12 and 32ºC. - Under the dehumidifying mode, fan is working in low speed. Timer function: - The appliance´s operating time can be controlled from 1~24h. If you press the button once, the appliance will working 1 hour, if you press twice, 2 hours etc up to 24 hours. - Auto-shut off timer is only available when the unit is on. - Under the cooling and heating mode, the setting temperature ranges from 16º~31ºC. Swing: - Press this button to control the movement of the louver. - Do not add new sections to the extraction tube provided, as it could cause the appliance to malfunction. - The appliance should be used with its base feet fitted. - The appliance should be used with its wheels attached. Instructions for use Use: - Unroll the cable completely before plugging it in. - Press the ON/OFF button, the unit will enter in cooling mode with low fan speed. - Press speed to select high or low fan speed. [. . . ] - Never submerge the appliance in water or any other liquid or place it under running water. - If the appliance is not in good condition of cleanliness, its surface may degrade and inexorably affect the duration of the appliance’s Anomalies and repair - Take the appliance to an authorised technical support service if product is damaged or other problems arise. Do not attempt to disassemble or repair the appliance yourself as this may be dangerous. - If any anomaly is detected, check the following table: English Anomalies The unit does not work The unit does not seem to perform Causes - No power supply - Water full indicator illuminate - Indirect sunlight - Window or doors open - Filter is very dirty - Air inlet or air outlet is blocked -  oom temperature is lower than the R setting one. [. . . ]