User manual TCL L39E3003F

[. . . ] Important information Safety Ensure that your domestic mains supply voltage matches the voltage indicated on the identification sticker located at the back of your set. Where the mains plug or an appliance coupler is used as disconnect device, it shall remain readily operable. On certain models, the light indicator is located at the side of the TV set. The absence of a light indication at the front does not mean that the TV set is fully disconnected from the mains. [. . . ] 4. Repeat this procedure to set up other favourite channels. 5. Press LIST/Exit to exit. ECO settings 1. Press Menu on the remote control and select Picture > ECO settings, press OK/► to enter ECO settings. 2. Press ◄/► to select desired power saving mode to achieve the desired power saving effect. The Picture preset option under Picture will now be set to Personal simultaneously. Shortcut operation: Press ECO on the remote control to perform the same function mentioned above. Selecting decoding page language in Teletext Press Menu on the remote control and select Options > Decoding page language. Select a proper type of language in which Teletext will display. Audio description Audio description refers to an additional narration track for Blind and visually impaired viewers of visual media, including television programmes and movies. The description narrator talks through the presentation describing what is happening on the screen during the natural pauses in the audio (and during dialogue if deemed necessary). You can use this feature if the current broadcast contains audio description. 1. Press Menu on the remote control and select Sound. 3. Use ▲/▼ to select Audio Description, press OK/► to enter, use ◄/► to turn this function on or off. Volume level can be adjusted by using the Audio Description menu. Digital Teletext language On digital TV channels, depending on the broadcaster, you may be able to enjoy a service with multiple initial Teletext pages in different languages. This function allows you to select an available language as primary language, which relates to different initial Teletext pages. Press Menu on the remote control and select Options > Digital teletext language. Press ◄/► to select. SPDIF type Connect the TV to an audio device through the SPDIF output. To select a proper sound type for your SPDIF output, press Menu on the remote control and select Options > SPDIF type. -- If you select PCM, the SPDIF output format is PCM, regardless of the programme’s sound format. -- If you select Dolby D, the SPDIF output format is • Dolby Digital when the programme’s sound format is Dolby Digital or Dolby Digital Plus or HE-AAC • PCM when the programme’s sound format is MPEG. Using subtitles You can enable subtitles for each TV channel. Subtitles are broadcast via Teletext or DVB-T/DVB-C digital broadcasts. With digital broadcasts, you have the additional option of selecting a preferred subtitle language. EN 10 Using more of your TV -- If you select Off, this turns off the audio output from the audio device connected to the SPDIF output. Note: The options you may choose depend on the programme you are watching. If you select PCM and the sound is ahead of the picture, you can select SPDIF delay from the Options menu and press ◄/► to adjust the delay time to synchronize the sound with the picture. Using the common interface module WARNING: Switch off your TV before inserting a common interface module. [. . . ] • The LCD panel’s fluorescent lamp may have reached the end of its service life. • Check the batteries of the remote control. • Make sure the remote sensor window on the TV front is not under strong fluorescent lighting. • Try to clean the remote sensor window on the TV front with a soft cloth. [. . . ]