User manual TCL U58S7806S

[. . . ] Important information Safety Ensure that your domestic mains supply voltage matches the voltage indicated on the identification sticker located at the back of your set. Where the mains plug or an appliance coupler is used as disconnect device, it shall remain readily operable. On certain models, the light indicator is located at the side of the TV set. The absence of a light indication at the front does not mean that the TV set is fully disconnected from the mains. [. . . ] 2. Press / to select Home, Shop or Shop with demo and press OK to confirm. 3. Press EXIT or MENU to close the menu. Note: According to the regulation of European Commission 2009/125/EC, in Home mode, TV will be put into standby mode automatically if there is no operation in 4 hours. This feature can be deactivated in the System > Timer > Auto standby menu. Common interface Encrypted digital TV channels can be decoded with a common interface module and a card provided by a digital TV service operator. The common interface module may enable several digital services, depending on the operator and services you choose (for example, pay TV). Contact your digital TV service operator for more information about services and terms. Using the common interface module WARNING: Switch off your TV before inserting a common interface module. Be sure to follow the instructions described below. Wrong insertion of a common interface module may damage both the module and your TV. 1. Following the directions printed on the common interface module, gently insert the module into the common interface slot on the TV. 2. Push the module in as far as it will go. 3. Turn on the TV and wait for the common interface function to be activated. Note: Do not remove the common interface module from the slot. Removing the module will deactivate the digital services. Accessing common interface services After inserting and activating the common interface module, press MENU or OPTION on the remote control, select Settings > System > Common Interface and press OK/ to enter. This menu option is only available if the common interface module is correctly inserted and activated. On-screen applications and content are provided by your digital TV service operator. T-Link Use this function to search for CEC devices connected to the HDMI sockets in your TV and enable one-touch play and one-touch standby between CEC devices. Enabling or disabling T-Link 1. Press MENU or OPTION on the remote control, select Settings > System > Advanced settings > T-Link and press OK/ to enter. 2. Press / to select On or Off and press OK to confirm. 3. Press EXIT or MENU to close the menu. Using one-touch play With one-touch play, pressing the play button on (for example) your DVD remote control starts playback on your DVD device and automatically switches your TV to the correct source, displaying DVD content. Using system standby With system standby, pressing the button on (for example) your TV remote control switches your TV and all connected HDMI devices to standby mode. [. . . ] This product uses some software programs which are distributed under the zlib Project. This product uses some software programs (libxml2) which are distributed under the MIT. This product uses some software programs which are distributed under the GPL/LGPL/MPL. GPL software: Linux Kernel, gettext, gtk+, libsoup, webkit(gtk), atk, glib, pango, glib-networking, libiconv, pixman, gnutls LGPL software: libgcrypt, enchant, libgpg-error, cairo, DFB (DirectFB) [Legal Statement] of TCL - manufacturer of this TV set Due to the various capabilities of products featuring the SmartTV - Services, as well as limitations in the available content, certain features, applications, and services may not be available on all devices or in all territories. [. . . ]