User manual TEAC 5FD0050A

[. . . ] A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] This unit can play MP3 and WMA files recorded on a CD-R or CD-RW disc. < File names of MP3 or WMA should be alphanumeric characters. This unit cannot display symbols and full-size or double-byte characters (such as Japanese, Chinese, etc. Also, be sure to use the file extension. This unit can play MP3 files with a sampling frequency of 44. 1 kHz or 48 kHz and a bit-rate of 320 kbps or less. < This unit can play WMA files with a sampling frequency of 44. 1 kHz and a bit-rate of 192 kbps or less. < Audio encoded at 128 Kbps should sound close to regular audio CD quality. Although this unit plays lower bit-rate MP3 tracks, the sound quality deteriorates noticeably at lower bit-rates. < The disc must be finalized in order to play. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables. < Unplug the power cord when you are not going to use the unit for an extended period of time. If you have TEAC AG-H600 series receiver, convenient system control functions are available. connect it to the SYSTEM CONTROL jack on the AG-H600 series receiver with the provided system control connection cord. Then set the SYSTEM CONTROL SELECTOR switch on this unit to "SYSTEM". ) Available system control functions are as follows: N When you turn on or standby the AG-H600 series receiver using the remote control unit (RC-1181) of the receiver, this unit is also turned on or standby synchronously. N When you change the source from CD to another on AG-H600 series receiver, playback stops and display turns off on this unit. When you want to use the system control functions, connect the SYSTEM CONTROL jacks (see C ), and set the switch to "SYSTEM". < The STANDBY/ON button on the remote control unit of this unit does not work while the switch is set to "SYSTEM". < When you do not use the system control functions or do not have a AG-H600 series receiver, set the switch to "SINGLE". Otherwise, you cannot turn on or standby the unit. [. . . ] Then select a track using the numeric buttons. To clear the program While playback is stopped, press the PROGRAM button, then press the stop button (H). < When you press one of the following buttons, the program is also cleared: open/close (L), STANDBY/ON on the remote control unit, POWER Each time you press the DISPLAY button, the information changes as follows. Each time you press the TIME button during playback, the time information changes as follows: Current track number and elapsed time of the current track Music calendar < Music calender shows the track number up to 15. [. . . ]