User manual TEAC AD-800-B

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] 20 Programmed Playback (1) This function can be used in CD and USB modes. Up to 30 tracks/files can be programmed in the desired order. 3 Press the CD/USB Skip ( or ) buttons to select a track/file, then press the PROGRAM button. 1 When playback is stopped, press the PROGRAM button to enter program mode. Example when in CD mode To stop programming, press the CD/USB Stop ( ) button. Programming is cancelled, but the program contents are retained in memory. If you want to restart program playback, press the PROGRAM button, and then press the CD/USB Play ( ) button. to stop programming , press the CD/USB Stop ( ) button. 4 2 (When programming MP3 files) Press the CD/USB Skip ( or ) buttons to select a folder, then press the PROGRAM button. When the selection of track/file numbers is completed, press the CD/USB Play ( ) button to start program playback. to stop program playback , press the CD/USB Stop ( ) button. After program playback finishes, press the CD/USB Play ( button to play the program again. MP3 files not located in a specific folder are in the “001” (ROOT) folder. ) You can use the CD/USB Skip ( and ) buttons during program playback to select and play other tracks/files in the program. The shuffle function does not work during program playback. €REPEAT 1” and “REPEAT ALL” playback are possible during program playback. When set to “REPEAT ALL” mode, the programmed tracks/files will be played repeatedly. 21 Programmed Playback (2) Adding tracks/files to the end of the program When playback is stopped, press the PROGRAM button repeatedly until “TRACK 00” appears on the display. Overwriting part of the program When playback is stopped, press the PROGRAM button repeatedly until the program number of the track that you want to change appears on the display. Press repeatedly Press repeatedly Select a track/file number you want to add using the CD/USB Skip ( and ) buttons, and then press the PROGRAM button. Program number to be changed Select the track/file number that you want to add using the CD/ USB Skip ( and ) buttons, and then press the PROGRAM button. The track/file is added to the end of the program. [. . . ] ENGLISH For European customers Disposal of electrical and electronic equipment (a) All electrical and electronic equipment should be disposed of separately from the municipal waste stream via collection facilities designated by the government or local authorities. (b) By disposing of electrical and electronic equipment correctly, you will help save valuable resources and prevent any potential negative effects on human health and the environment. (c) Improper disposal of waste electrical and electronic equipment can have serious effects on the environment and human health because of the presence of hazardous substances in the equipment. (d) The Waste Electrical and Electronic Equipment (WEEE) symbol, which shows a wheeled bin that has been crossed out, indicates that electrical and electronic equipment must be collected and disposed of separately from household waste. [. . . ]