Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual TEAC AG-V8520. We hope that this TEAC AG-V8520 user guide will be useful to you.
Lastmanuals help download the user guide TEAC AG-V8520.
Detailed instructions for use are in the User's Guide.
[. . . ] If you are in any doubt regarding this matter, consult an electrician. Also avoid locations subject to vibrations and excessive dust, heat, cold or moisture. < Do not place the unit on the amplifier/receiver. < Do not open the cabinet as this might result in damage to the circuitry or electrical shock. [. . . ] Caution: Make sure that the total power consumption of all equipment connected to the outlet does not exceed 100 watts or 1A. Be sure to connect the power cord to an AC outlet which supplies the correct voltage. Hold the power plug when plugging or unplugging the power cord. Press this switch to turn the unit on or off. The equipment draws nominal non-operating power from the AC outlet with its POWER switch in the OFF position. This indicator lights when the unit is in the standby mode. In the standby mode, press the POWER button of the remote control unit or the Input buttons of the main unit to turn the unit on. When the unit is turned on, the indicator goes off. Use this button to store preset channels into memory. When operating the remote control unit, point it towards the REMOTE SENSOR. This indicator lights when the SPEAKERS button (A or B) is set to on. To listen to the TAPE, turn the tape monitor function ON using the TAPE MONITOR button. To listen to a source other than TAPE If the tape monitor function is ON ("TAPE MON " indicator is lit), press the TAPE MONITOR button to turn it off. This control is used for adjusting the level of the low frequency sound range. Within 3 seconds, turn the JOG dial to adjust the level. The level can be adjusted in 2 steps from 10 to +10. Caution: If the speakers are connected to the SPEAKERS A terminals, turn the SPEAKER A on using the SPEAKERS A button. If no speakers are connected to the SPEAKER B terminal, be sure to turn off the SPEAKER B button, or no sound will be output from SPEAKER A, and vice versa. This control is used for adjusting the level of the high frequency sound range. For private listening, first reduce the volume level on the receiver to minimum. Then insert the plug from your headphones into the PHONES jack, and adjust the volume by turning the VOLUME knob. If you want to cut off the sound from speakers, press the SPEAKERS button to turn it off. [. . . ] Make sure there is power to the AC outlet by plugging another item such as a lamp or fan. E If your speakers are connected to the SPEAKER A terminals, make sure the SPEAKER A button on the front panel is depressed. If you have no speakers connected to the SPEAKER B terminals, Make sure the SPEAKER B button on the front panel is not depressed. Only select the SPEAKER outputs with speakers connected. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE TEAC AG-V8520
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual TEAC AG-V8520 will begin.
