User manual TEAC AH01 B

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to aler t the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. [. . . ] Connect an audio output device such as cassette deck or CD player to these terminals by using RCA cables. Connect the R and L terminals on this unit to the right (R) and left (L) terminals on an audio output device respectively. White (L) Red (R) White (L) Red (R) B USB input terminal Inputs digital audio from a computer. < Install dedicated TEAC driver software on the computer before connecting the unit. (page 12) < Note that connection cables indicated other than the power cord are not included with this product. All other connection cables are available from your retail dealer. C Subwoofer terminal If you want to use a subwoofer, connect it to this terminal. COAXIAL: RCA digital coaxial cable OPTICAL: Optical digital cable (TOS) E Power cord connector Connect the supplied power cord to the power cord receptacle. After all other connections are complete, connect the power cord's plug to the wall socket. Do not use any power cords other than the one included with this unit. Use of other  power cords may result in fire or electric shock. Unplug the power cord when you are not going to use the unit for several weeks. 7 Speaker Connection Right Speaker CAUTION before connection Left Speaker How to connect: 1 Turn the terminal cap counterclockwise to loosen it. The speaker terminal caps cannot be fully removed from the product. 2 Insert the wire into the terminal and < After all other connections are complete, connect the power cord's plug to the wall socket. < Read the instructions of each device that you intend to use with this unit. Caution < Check the impedance of your speakers. Connect speakers with an impedance of between 4 ohms and 8 ohms. < The red speaker terminals are + (positive) and the black speaker terminals are – (negative). Generally, the + side of the speaker cable is marked to make it distinguishable from the – side of the cable. Connect the marked side to the + terminal and the unmarked side to the black – terminal. < The metal portions of the two separate wires should not touch or an electrical short may occur. [. . . ] When the unit is connected to a computer via USB hub, noise may be heard. Connect this unit to the computer, and set this unit’s input to “USB” before starting music playback software to start playback. If you connect this unit to the computer or you set this unit’s input to “USB” after starting music playback software, music files might not play back properly. dedicated driver software must be installed. [. . . ]