User manual TEAC AQ-VU BROCHURE

[. . . ] Time correction, 30 seconds correction, Communication Units specifications Video specifications Video input Video output Picture data handling Channels and Video interval 4ch, BNC NTSC VBS 1. 0 Vp-p 75 ohm 1ch, BNC NTSC VBS 1. 0Vp-p +/-1. 0% 75 ohm Quantization frequency/bit : 13. 5MHz/8bit Video compression : Motion JPEG (Original) 1 2 3 4 5 CHs 1 2 3 4 4 Pixels 720 x 240 720 x 240 720 x 240 720 x 240 360 x 120 Recording interval (fields/sec) 60 30 30/15 15 60 Visual Data Recorder AQ-VU http://www. teac. co. jp/ Indication function Video viewing Waveform/Bar meter Character display Recording mode Start operation Stop operation Hard disk mode Data specifications Input Input ranges Output Output ranges Quantization bit rate Sampling method Others Sync accuracy Sync signal 4ch Sampling Frequencies 2kHz fix +/-1, +/-2, +/-5V 4ch +/-2V fix 16bit (LSB 1 bit is used as identification sign) Successive approximation type / Multiplexer type +/-1 frame (in one video channel mode) Start/Stop signal input : Starts on Low, stops on Hi (polarity reversible) Duration : 100mS or more. Repeat duration: 600mS or more Sampling clock signal input : Sampling clock of measuring data (200 kHz or less) Alarm signal output : Indicates malfunctions of this unit Event signal input : Negative logic pulse or make-contact, +5V pull-up (10k ohm) Stores event on Lo Serial interface signal : TTL input / output TCP/IP 100Base-TX 2. 5" removable HDD, using removable type package Capacity : 40GB Exchanging operation : Exchange after stopping REC or PLAY, then shutting down the power. Vehicle and rail safety test and driving test Playback Playback operation Synchronous 4 channels video and data recording High-speed driving test Search Event Menu Event list Main unit settings Record settings Monitor settings * Ethernet Recording media Hard disk mode, Analog input ON/OFF, Hard disk initialization, etc Character (date and time) / Bar graph selectable Set the recording time prior to the recording start condition as mentioned above. [. . . ] 200 x 60 x 205 mm , 7 7/8" x 2 3/8" x 8 1/16" (excluding protruding Parts) Weight Approx. 2. 3kg/5. 07lb (Including 40GB HDD pack) Standard accessories Manual, Veiw Softwarer ( CD-ROM ), HDD Pack ( 40GB ), USB cable, BNC cable, AC adapter Equipment maintenance such as elevators Others 32 channels synchronized recording By connecting with LX-100 series data recorder, as much as 32 channels of data can be synchronously recorded. VIDEO OUT Connector CAMERA IN Connector LAN Connector SYNC IN Connector DC IN Connector POWER Switch CAMERA POWER Connector LCD Display ANALOG IN/OUT Connector POWER LED OPTION LX-100 series sync. kit Contents of Kit Cable LX View Basic Software PL-S1100) Temporary monitor of plumbing and pump pressure such as in air conditioning repair VISUAL DATA RECORDER AQ-VU LX View Sync. Option Software 205 Network Monitoring AQ-Net ( PL-S1100 ) Adapter cable for camera power supply (Approx. 10cm) CL-AQ-CPWR BNC conversion cable (1. 5m) CL-AQ-BNC HDD Pack (40GB) PH-AQ-40 HDD Pack (80GB) PH-AQ-80 Factory/Plant equipment Key ENTER Key MONITOR Key STOP Key REC Key MENU Key FWD Key PAUSE Key REV Key It is used in a wide field 60 HDD Pack [ Product line ] [ Architecture ] Extended recording at an unattended automatic product line Building skew and bridge shake 5. 5 17 200 17 Unit : mm [ Vehicle performance test ] Vibration data with synchronous video on high-speed driving test [Bio-measurement] Driver's bio-measurement with synchronous video [ Product line ] Monitor to find a product line problem and record vibration outbreak [Support Service ] Temporary measurement and monitor of manufacturing support service [ Elevators ] [ Factory ] Monitor elevator malfunction Periodic maintenance of plant equipment and temporarily monitor faulty point [ Machinery ] Environmental tests of machinery for deterioration, quake resistance, weather change [ Product line ] Production line safety check Corporate and product names are the respective trademarks or registered trademarks of the companies mentioned. Features and specifications are subject to change without notice. Precaution : To ensure safe handling and operation, read the Instruction Manual before use. Information Products Division 1-47 Ochiai, Tama-shi, Tokyo 206-8530, Japan Phone : +81-42-356-9161 FAX : +81-42-356-9185 URL : http://www. teac. co. jp/ Copyright TEAC CORPORATION 2008 PRINTED IN JAPAN 1008 1 NH BSC-029B [ University / Research organization ] 4 channels synchronous video and analog data recording Quickly verify the recorded video and analog data on-site with 6. 4" LCD monitor Synchronous video and data recording Video x4 Video NTSC Camera (example) Controlling and monitoring from the desk LAN 4ch 3ch 2ch 1ch 4ch High-resolution recording Synchronous recording and play-back 4ch Video Motion-JPEG Wave data Analog Analog data x4 Vibration Pressure Weight Temperature Strain etc. Motion-JPEG with 60 fields/sec max Analog Input ON/OFF Synchronous play-back of recorded video and analog data Displacement Noise * * Sampling frequency is 2 kHz, so the band-width is 1 kHz or less. Monitoring at the desk AQ-VU is capable of synchronously recording up to 4 channels of video camera data and up to 4 channels of analog data. The recorded video and analog data are stored in the HDD pack and they can be synchronously played back. The video is recorded as fast as 60 frames per second per channel in Motion-JPEG for smooth high resolution. The number of recording channels in both video and analog can be freely selected based on application needs. The event outbreak time can be easily managed. The accessory viewer software allows play-back of the recorded video and analog data synchronously on PC. It can record a video with various synchronized measurement data using LX-100 series. OPTION Monitoring in the field Removable HDD Pack (USB Interface) OPTION Stand-alone unit (not requiring PC) It can record video and analog data without PC connection. Small footprint allows use in confined spaces. Perfectly synchronized Perfectly synchronized between the video and data even after the extended recording. Accumulation delay time is zero * ( Video and analog signals are recorded as a set frame, preventing accumulation delay time. [. . . ] Cables and optional viewer software screen The data can be transferred to a file in TAFFmat format. The video at mouse cursor position can be played-back Small and lightweight (2. 3kg/5. 07lb) Small, portable, compact package allows easy use of AQ-VU in the field (2. 3kg/5. 07lb). It runs on either DC 10 to 17 volts or AC power sources. [. . . ]