User manual TEAC CD-RW880

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. 5) Do not use this apparatus near water. 7) Do not block any ventilation openings. install in accordance with the manufacturer's instructions. [. . . ] A track cannot be replayed during shuffle playback. < If one of the following buttons is pressed, shuffle mode will be cancelled: SHUFFLE in the stop mode, OPEN/CLOSE, STANDBY/ON, POWER < Shuffle playback works with finalized discs only. Each time the REPEAT button is pressed, the repeat mode is changed as follows: Please note that CD-R/CD-RW discs that haven't been finalized cannot be used for A-B repeat. The track being played will be played repeatedly. If you press the MUSIC SKIP button and select another track, the track you selected will be played repeatedly. it is also possible to select a track to be repeated in the stop mode. Press the REPEAT button twice and then select the track number by pressing the MUSIC SKIP button. Start playback and designate the point at which the A-B repeat should start (point A) by pressing the A-B button. When the point at which repeat playback should end (point B) is reached, press the A-B button again. < After designating point A, the SEARCH button can be used to fast-forward or fast-backward to point B. Note that the point B should be forward the point A. < MUSIC SKIP buttons don't work during A-B repeat playback. < If one of the following buttons is pressed, repeat mode will be cancelled: OPEN/CLOSE, STANDBY/ON, POWER < Repeat playback works with finalized discs only. < If one of the following buttons is pressed, A-B repeat mode will be canceled: A-B, STOP, OPEN/CLOSE, STANDBY/ON, POWER < Shuffle playback does not work during programmed playback. < Programmed playback works with finalized discs only. 3 When the selection of track numbers has been finished, You can also use the MUSIC SKIP button and the PROGRAM button to program tracks. < If you made a mistake, press the CLEAR button. Before you start recording, make sure that you understand the following points: < The unit requires Digital Audio CD-R or CD-RW media for recording. Computer CD-R or CD-RW discs do not work with this unit. < Once you have recorded on a CD-R disc, the data cannot be erased from it. < You can add tracks to an unfinalized recordable disc. Once finalized, a CD-R disc is "fixed" and behaves in the same way as a CD. [. . . ] To prevent this, or if this occurs, leave the unit for one or two hours with the power turned on. The unit will stabilize at the temperature of its surroundings. If the surface of the unit gets dirty, wipe with a soft cloth or use a diluted mild liquid soap. Be sure to remove any excess liquid completely. [. . . ]