User manual TEAC CD-W0003A

[. . . ] PortaCD-RW Drive User's Manual CDWE24E USB PCMCIA 4X4X6 4X4X24 ® FCC Radio Frequency Interference Regulations Warning: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions contained in this manual, may cause harmful interference to radio and television communications. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Subpart J of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Do not insert the PCMCIA card into the computer at this time. With Windows 98SE/Me/2000, the PortaCD-RW enables you to perform a "hot swap" installation while the computer is powered on. You will insert the card for the first time later as part of the software installation procedure. Connect the AC adapter cable to the AC power input on the PortaCDRW drive (Figure 23). PCMCIA cable headphones cable (not included) AC adapter cable Figure 23. Connecting Cables TEAC PortaCD-RW User's Manual 23 Detecting the PCMCIA Card Before you can operate the PortaCD-RW, you must: make sure Windows recognizes the PCMCIA socket, and install the device driver software on your computer's hard disk. To determine whether Windows recognizes the PCMCIA socket in your computer, follow these steps, which may vary slightly with your version of Windows. Select Start>Settings>Control Panel from the pop-up menu. The system displays the Control Panel (Figure 24). PCMCIA Card icon System icon Figure 24. Control Panel 2. Double-click the System icon in the Control Panel. The system displays the System Properties panel (Figure 25). 3. Click the Device Manager tab on the System Properties panel. The system displays the Device Manager (Figure 25). socket items recognized by the system Figure 25. System Properties Panel 24 TEAC PortaCD-RW User's Manual 4. Double-click the item PCMCIA Socket on the Device Manager listing. The Device Manager displays the PCMCIA Socket items currently recognized by the system (see Figure 25 on page 24). If an "x" or "!" mark appears on an item, it is not currently recognized by the system. In this case, you must install the PCMCIA driver using the PCMCIA Card Wizard. (See "Installing the PCMCIA Card Using the Windows PC Card Wizard" on page 26. ) If the TEAC PCMCIA/IDE card is recognized by the system, proceed to "Installing the PortaCD-RW Driver Using the Windows Wizard" on page 28. Note: If the PCMCIA Card icon does not appear in the Control Panel, try doubleclicking the Add New Hardware icon and instruct the Wizard to search for new hardware. TEAC PortaCD-RW User's Manual 25 Installing the PCMCIA Card Using the Windows PC Card Wizard Follow the steps below to install the PCMCIA driver using the PC Card Wizard. Open the Windows Control Panel by selecting Start>Settings>Control Panel from the pop-up menu. On the Control Panel, double-click the PC Card (PCMCIA) icon. The system displays the Welcome to the PC Card (PCMCIA) Wizard panel. Figure 26. Welcome to PC Card Wizard Follow the instructions on the PC Card Wizard panels to complete the installation. Note: The system configuration and your dialog responses determine which panels the Wizard will display. Do not be concerned if your installation process varies slightly from the one described below--just follow the dialog instructions. 3. Click the Next button. The system displays the following panel (Figure 27). Figure 27. PC Card Wizard 26 TEAC PortaCD-RW User's Manual 4. Click the Next button. The system displays the following panel (Figure 28): Figure 28. [. . . ] Alternatively, if your computer contains a sound card that features audio output jacks, you can connect the external powered-speakers to the audio connectors of the computer. Figure 69. Connecting Analog Audio Speakers or Headphones TEAC PortaCD-RW User's Manual 57 58 TEAC PortaCD-RW User's Manual Chapter 7. Handling, Loading, and Ejecting Discs This section explains how to handle, load, and eject discs from the PortaCD-RW. Handling Discs Handle compact discs only by their edges to avoid getting fingerprints on the surface. Do not touch the disc's data surface (non-label side). [. . . ]