User manual TEAC CD-W0040A

[. . . ] To prevent fire or shock, do not expose the unit to moisture or rain. To prevent electrical shock, do not attempt to disassemble the CD-RW drive. Refer servicing to authorized personnel. The CD-RW drive utilizes a laser beam that can be harmful to the eyes. [. . . ] Therefore, there is no need to connect the audio cable that came with your CD-RW drive. This audio cable is not necessary for recording audio CDs. Connect the power cable to the power connector on the rear panel of the CD-RW drive. Insert the power cable plug in the correct orientation into the power connector. The plug is shaped so that it can be easily inserted in only one orientation; do not force the plug into the connector. The +5v terminal is on the left as you face the rear of the panel; the +12v terminal is on the right. The two center terminals are ground terminals. Re-install your computer's cover, faceplate, or bay cover. Start your system. High Speed Recording Guidelines To optimize your drive performance and avoid system lockup conflicts, especially when recording to CD-R disc at 24X speed, you need to exercise the following options to enable DMA on your system: Windows XP 1. 2. 10 Right-click My Computer and select Properties. Click Hardware and select Device Manager. TEAC CD-RW Drive User's Manual High Speed Recording Guidelines 3. There is no need to install any drivers. Windows NT 4. 0 Workstation Users: Windows NT 4. 0 does not support the Plug-N-Play feature. Therefore, confirm that the IDE CD-ROM DRIVE ATAPI version 1. 2 driver is installed. If not, open the Control Panel, double click "SCSI Adapters, " click the "Drivers" tab, then click the "Add" button. At the "Select a SCSI Adapter Option" window, select "IDE CD-ROM DRIVE (ATAPI Ver 1. 2). " Click "Install" and follow the instructions on screen. The drive is recognized by the operating system as a typical CD-ROM drive. Once you confirm that you can read (play) data discs from the CDRW drive, install the Roxio software to enable recording to CD-R and CDRW discs. (For more information, see Chapter 3, beginning on page 15. ) TEAC CD-RW Drive User's Manual 13 Connecting to Audio Equipment Connecting to Audio Equipment The CD-RW Drive outputs line-level audio signals from the headphone jack on the front panel. You can connect headphones or external powered speakers here. The headphone jack accepts a 3. 5 mm stereo mini-plug. For external powered speakers, connect a stereo adapter to split the output into separate leads for the left and right channels. [. . . ] Select a Project: Web-checkup Button 2. Click the web-checkup button and follow the instructions on the web page to download the software updates. TEAC CD-RW Drive User's Manual 29 Creating CD Labels (CD label creator button) Creating CD Labels (CD label creator button) If you upgrade to the Platinum version of Easy CD Creator 5 as described above, the CD Label Creator button is activated, enabling you to create CD labels and design CD jackets. CD Label Creator rollover Figure 34. Select a Project: CD Label Creator Button Uninstalling Easy CD Creator 5 Basic To uninstall Easy CD Creator 5 Basic, use the Add/Remove Program tool in the Control Panel. Select Start>Settings>Control Panel. Double-click the Add/Remove Program icon. [. . . ]