User manual TEAC CR-H225

[. . . ] Z 9A10355400 CR-H225 CD/Receiver OWNER'S MANUAL Contents Thanks you for choosing TEAC. Read this manual carefully to get the best performance from this unit. 5 How to Reset the Settings to the Factory Defaults . When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. [. . . ] < When the . m button is pressed once during playback, the track/file being played will be played from the beginning. To return to the beginning of the previous track/file, press the . m button twice. For instance, to select track/file number 35, press `3', `5'. To select numbers less than 10, press the number and then the ENTER button. As an example, to select number 5, press `5' and the ENTER button. (Optionally, you may press just the number `5' and then wait a few seconds. ) 18 Repeat Playback Every time the REPEAT 1/ALL button is pressed, the mode is changed as follows: Repeat 1 RPT Folder (Only USB, MP3/WMA disc) Repeat All Play (Repeat Off) Repeat A-B This function allows repeat playback of any desired portion of the disc. 1 Designate the point at which repeat playback should start by pressing the A-B button. `Repeat A-' lights up and `B' blinks. 2 When the point at which repeat playback Repeat One Track [Repeat 1] The track/file being played will be played repeatedly. If you select another track/file in Repeat 1 mode, the track/file you selected will be played repeatedly. should end is reached, press the A-B button again. The designated point with A-B button will be played back repeatedly. < To return to normal play, press A-B button until `Repeat A-B' disappears from the display. < It must be more than 3 seconds between A and B. Repeat Folder [RPT Folder] (Only USB, MP3/WMA disc) All the tracks or files in the folder will be played repeatedly. Repeat All All the tracks or files will be played repeatedly. 19 Programmed Playback . // y CLEAR PROGRAM < This function allows you to program up to 32 tracks or files for playback in any desired order. 1 Press the PROGRAM button in the stop mode. 3 Press the PLAY button (y ) to start programmed playback. < The programmed contents for audio CDs are not lost even if the unit is turned off, but they are lost when the disc tray is opened or the USB device is disconnected. < The unit will stop automatically when the playback of all the programmed contents is finished, and the program contents disappears from the display, but they are not lost. < To start program playback again, press the PROGRAM button and the PLAY button (y). 2 Select the desired track or file by pressing the . or / button and press the PROGRAM button to enter. To check the programmed order Repeat this step to store other tracks. < If you attempt to program more than 32 tracks or files, `P-FULL' is displayed and no more can be programmed. Press the PROGRAM button repeatedly in the stop mode. The track/file number and program number will be shown on the display. 20 Shuffle Playback To delete a track/file from the program In the stop mode, press the PROGRAM button repeatedly until the program number to be deleted appears on the display, then press the CLEAR button. The selected track/file is deleted from the program. To clear the program 1. In the stop mode, press the PROGRAM button. Hold down the CLEAR button for more than 4 seconds. Press the SHUFFLE button in the stop or play mode. The tracks or files will be played randomly. `CD/Random play' or `USB/Random play' is displayed. < If you press the / button during shuffle playback, next track will be randomly selected and played. [. . . ] e Install the antenna again after locating the best reception position. Though the broadcast is stereo, it sounds monaural. e Press the FM MODE button. If normal operation cannot be recovered, unplug the power cord from the outlet and plug it again. 34 Specifications AMPLIFIER Section Output Power . . 25 W/ch (6 ohms, 0. 5 %, 1 kHz) Input Sensitivity . [. . . ]