User manual TEAC CR-H227I

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. [. . . ] The sound from the speakers is cut off while the headphone jack is inserted. < If you change the volume during the muting, the muting will be canceled. The power can be switched off after a specified amount of time. < Subwoofer output will not be cut off, even when the headphone jack is inserted. CAUTION Always lower the volume level prior to plugging in your headphones. TO AVOID DAMAGING YOUR HEARING - Do not place your headphones on your head until after you have plugged them in. 10) The power will be switched off 90 (80, 70 . < The display is dimmed when you set the sleep timer. < If you want to check the remaining time , press the SLEEP button once. The remaining time will be displayed for 3 seconds, and return to the normal display. BASS Adjusts the level of low frequency sound range. The level can be adjusted from ­10 to +10. TREBLE Adjusts the level of high frequency sound range. The level can be adjusted from ­10 to +10. BALANCE Adjusts the balance of the volume level between left and right speakers. 2 Within 3 seconds, turn the VOLUME/SELECT < This function will be cancelled when the unit is turned off. < You can also use the DIMMER button of the remote control unit to turn on or off the dimmer function. 3 Leave the unit idle for 3 seconds to exit the Getting started with iPod The CR-H227i comes mounted with an adapter for iPod with color display (40GB, 60GB), "60GB (color) + Photo 40GB/60GB". To play your iPod through the CR-H227i, you have first to check if the factory mounted adapter fits your model of iPod. If it does not, you have to replace it with a correct one, as explained below. Hold the left and right sides of the adapter and gently pull it up. Choose the Dock adapter that fits your iPod mobile digital device. [. . . ] If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. There is no sound even if the PLAY button (y) is pressed. Edit the song title, artist, and album information of the song on a PC using the MP3 or WMA making application. Some unknown characters are displayed on the display panel. [. . . ]