User manual TEAC DV516E

[. . . ] PortaDVD User's Manual 8X DVD 24X CD-ROM ® FCC Radio Frequency Interference Regulations Warning: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions contained in this manual, may cause harmful interference to radio and television communications. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Subpart J of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] The Device Manager displays the PCMCIA Socket items currently recognized by the system (see Figure 5 on page 7). If an "x" or "!" mark appears on an item, it is not currently recognized by the system. In this case, you must install the PCMCIA driver using the PCMCIA Card Wizard. (See "Installing the PCMCIA Card Using the Windows PC Card Wizard" on page 9. ) If the TEAC PCMCIA/IDE card is recognized by the system, proceed to "Installing the PortaDVD Driver Using the Windows Wizard" on page 11. Note: If the PCMCIA Card icon does not appear in the Control Panel, try double-clicking the Add New Hardware icon and instruct the Wizard to search for new hardware. 8 TEAC PortaDVD User's Manual Installing the PCMCIA Card Using the Windows PC Card Wizard Follow the steps below to install the PCMCIA driver using the PC Card Wizard. To do so, click the Start button, and select Settings-->Control Panel from the pop-up menu. On the Control Panel, double-click the PC Card (PCMCIA) icon. The system displays the Welcome to the PC Card (PCMCIA) Wizard panel. Figure 6. Welcome to PC Card Wizard Follow the instructions on the PC Card Wizard panels to complete the installation. Note: The system configuration and your dialog responses determine which panels the Wizard displays. Do not be concerned if your installation process varies slightly from the one described below. The system displays the following panel. Figure 7. PC Card Wizard TEAC PortaDVD User's Manual 9 4. Click the Next button. The system displays the following panel: Figure 8. PC Card Wizard 5. Click the Finish button. The system displays the following panel: Figure 9. System Settings Change 6. Click the Yes button to shut down the computer. The system shuts down the computer. 7. Power on the computer. 10 TEAC PortaDVD User's Manual Installing the PortaDVD Driver Using the Windows Wizard The following sections explain how to install the PCMCIA driver using the Windows Add New Hardware Wizard. For Windows 98/Me/2000 The installation procedure for the PCMCIA Card Driver varies depending on the version of Windows 98/Me/2000 installed in your computer. To install the driver on a Windows 98/Me/2000 system, follow these steps: 1. Insert the PCMCIA card into the PCMCIA card slot in your laptop computer. The other end of the card/cable should already be connected to the interface connector on the PortaDVD. (For more information, see "Connecting the PortaDVD" on page 6. ) The system displays the initial Add New Hardware Wizard panel. Figure 10. [. . . ] To launch DVDExpress, select: Start-->Programs-->Mediamatics DVDExpress-->Mediamatics DVDPlayer. The system displays the DVDExpress Control Panel (Figure 16 on page 14). Click the question mark icon to access DVDExpress Help for operational information. TEAC PortaDVD User's Manual 17 Handling Discs Handle compact discs only by their edges to avoid getting fingerprints on the surface. Do not touch the disc's data surface (non-label side). Do not place discs in direct sunlight, or in locations subject to high humidity, high temperatures, or dusty conditions. [. . . ]