User manual TEAC DW-CD224PU

[. . . ] ® Portable USB CD-RW/DVD-ROM Drive DW-224PUK Portable USB CD-RW Drive CD-W224PUK User's manual To ensure the smooth handling of your warranty please write the serial number of your drive into the box. In the case of warranty you are expected to send it together with a copy of your invoice to your nearest TEAC sales representative. · Changes in specifications and features may be made without notice or obligation. · · · Copyright © 2003, TEAC Corporation Ltd. First edition: January 2003 Company and product names provided herein are trademarks of their respective companies. Windows 98 Second Edition, Windows Me, Windows 2000 and Windows XP are registered trademarks of Microsoft Corporation in the U. S. CONTENTS TO THE USER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Part of the message may differ depending on the operating systems. Terminate any applications (CD-R/RW writing software, etc. ) that are using the drive or a file on the media in the drive. Press the eject button at the front of the drive to take out the media. When the media is used with CD-R/RW packet writing software, etc. , take out the media with the procedure using the software. 6. Left-click on the Hardware disconnecting icon on the Taskbar at the lower right of the screen. ENGLISH Windows 98SE Windows 2000 A list of removable devices appears as a menu. Left-click on the applicable drive. Windows 98SE with TEAC CD-W224PUK Windows 98SE with TEAC DW-224PUK Windows 2000 4. The message that the USB storage device can be safely disconnected appears in a few seconds to allow you to remove the USB cable connecting the drive and the computer. Windows 98SE with TEAC CD-W224PUK 100 6. Setting up the Drive Windows 98SE with TEAC DW-224PUK Windows 2000 When a message appears that the USB storage device cannot be disconnected, one or more applications are still using the drive. Perform the disconnecting procedure after terminating the applications. C a u tio n 5. Click the OK button to pull out the USB cable. W a r n in g Do not remove and reconnect the drive from or to the computer in rapid succession. Setting up the Drive 101 ENGLISH 6. 3 Driver installation under Windows 98SE/Windows Me ENGLISH When the drive is used for the computer in Windows 98 Second Edition or Windows Me (Windows Me for DW-224PUK only), it is required to install the device driver before connecting it to the computer for the first time. The device driver is on the provided driver disk for Windows 98SE and Windows Me. When no floppy disk drive is installed in your computer, connect it in advance before connecting the drive to the computer for the first time. When your computer has only one USB terminal and the floppy disk drive is using that connector, create a new folder on your hard disk drive and save the contents of the driver disk for Windows 98SE or Windows Me before connecting this drive. The equivalent of the contents of the driver disk for Windows 98SE and Windows Me can be downloaded from our web site. When you cannot use a floppy disk drive and you can connect to the Internet, download it to your hard disk drive before connecting the drive. The device driver needs to be installed only when connecting the drive for the first time. The drive can be used just by connecting it to the USB terminal after the initial installation. C a u tio n 1. Connect as described before the dedicated AC adapter to the drive, then connect the USB interface cable between the drive and your computer. 102 6. Setting up the Drive CD-W224PUK DW-224PUK 6. Setting up the Drive 103 ENGLISH 2. When the computer detects that the drive is newly connected, the message "New hardware is detected. [. . . ] When a Zone CLV write is performed, concentric patterns may appear on the recorded surface due to the change of writing speed depending on the media used. Even when using media of which write operation has been confirmed, normal write operation may not be performed due to variations of the product lot etc. , or a read using other CD-ROM drives or CD players cannot be performed due to the deterioration of the write quality of the CD-R/RW media. It is recommended that you check the contents of data after writing to a CD-R/RW media. C a u tio n 10. SUPPORT AND SERVICE ENGLISH This product has been produced under strict quality control and you can use it worry-free under normal conditions. [. . . ]