User manual TEAC EU-3280S

[. . . ] Record these numbers in the spaces provided below. Refer to them whenever you call TEAC Digital customer service or your TEAC dealer regarding this product. Model Number: Chassis Number: Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical. Caution: Using video games or any external accessory with fixed images for extended periods of time can cause them to be permanently imprinted on the picture tube (or projection TV picture tubes). ALSO, some network/program logos, phone numbers, etc. [. . . ] Bass: Treble: Balance: Surround: 0 (less Bass) to 63 (more Bass) 0 (less Treble) to 63 (more Treble) L31 (Left Dominance) to R31 (Right Dominance) Off; Low (slight surround effect); High (marked surround effect) Audio Menu Audio Bass Treble Balance Surround 31 31 Low 00 9 Instruction Manual FUNCTIONS & FEATURES (continued) Note: This menu is only accessible while the TV is in Tuner mode. Tuner Menu Add/Erase: This feature allows you to add or remove the channel currently display on screen to the "active channel list" . Active channel list is the list of channel that is available by pressing the CH+/- keys. Use the left or right arrow key to add or erase. Antenna: This feature sets the TV tuner to an Air antenna or a Cable antenna. Please use Air mode when using an over-the-air antenna; use Cable mode for a cable hookup. Use the left or right arrow key to select between the two options. Channel: This feature allows you to change the channel displaying on screen. Use the left or right arrow key or the numeric keypad to change the channel. Tuner Channel Add/Erase Antenna Auto Program Stop Start 2 Add Air Auto Program: This feature will setup the Active channel list for the user. The list will include only the channels with a signal detected. Press the right arrow key to begin and the left arrow key to stop the process. Press the TIMER key on the remote control to access this menu. Time This feature allows you to set the clock on the TV. Please note that blocking a lower rating (for example, PG) will block all higher ratings (PG-13, R, NC-17, X. ) Pass Code Menu This menu allows you to change the access code for the Parental Guide functions of the TV set. Press the MENU key when Pass Code Control is highlighted. This will turn on or off the Pass Code function. With the Pass Code function ON, you can also change the Pass Code. Use the down arrow key to highlight Pass Code, then enter the new Pass Code using the numeric keypad. Note: The factory default pass code of 6688 is also the override code, in case you forget your new pass code. MPAA Rating Grid MPAA - Rating Movie G PG PG-13 R NC-17 X Rating U U U U U U Age Based Rating Pass Code Menu Grid Pass Code Menu Pass Code Control Pass Code 6688 Enter Pass Code - - - - 11 Instruction Manual FUNCTIONS & FEATURES (continued) Useful Remote Control Features DISPLAY This key allows you to display the current information of the TV screen on the upper right hand corner of the screen. (channel, antenna mode, time, video, etc. ) TIMER This key allows you to directly access the Timer menu. For an explanation of this menu features, please see page 10. SCAN Press the SCAN key twice, and the TV will begin to scan through all active channels. To stop the Scan, pressing any key can interrupt scanning. Please note that Scan will only work in Antenna mode. [. . . ] Limited One (1) Year Warranty Apex Digital, lnc. further warrants the parts in this product against defects in material or workmanship for a period of one (1) year after the date of original retail purchase with exception of the remote control which is guaranteed for ninety (90) days. will replace a defective part with a new or refurbished part without charge to you, except that if a defective part is replaced after ninety (90) days from the date of original retail purchase, you are responsible to pay all labor charges involved in the part(s) replacement. You must also deliver the entire product to an Apex Digital, Inc. [. . . ]