User manual TEAC HA501

[. . . ] 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. [. . . ] If you are in any doubt regarding this matter, consult an electrician. As oo the unit could become warm during operation, always leave sufficient space around it for ventilation. When placing this unit, position it so that it is at least 3 cm (1. 2") from walls and other devices in order to allow good heat dissipation. When installing it in a rack, leave at least 5 cm (2") open above the unit and 10 cm (4") open behind it. Do oo not open the body of the unit as this might result in damage to the circuitry or cause electric shock. If a foreign object should get into the unit, contact your dealer or TEAC customer service. When removing the power plug from the wall outlet, oo always pull directly on the plug; never yank on the cord. Depending on the electromagnetic waves of television oo broadcasts, interference might appear on television screens when this unit’s power is on. This does not mean that this unit or the TV is malfunctioning. If this occurs, turn this unit’s power off. Maintenance If the surface of the unit becomes dirty, wipe it with a soft dry cloth. If the unit becomes very dirty, dampen a soft cloth slightly with a diluted neutral cleanser and thoroughly wring out any excess fluid before using the cloth to wipe the unit. Q  or your safety, disconnect the power cord from F the socket before cleaning. Never spray liquid directly on the unit. Oo Do oo not use thinner or alcohol as they could damage the surface of the unit. Avoid allowing rubber or plastic materials to touch this oo product for long periods of time, because they could damage the cabinet. V Use precaution Listening to anything at a high volume for a long time could be harmful to your hearing. In order to protect your ears, be careful not to set the volume too high when listening with headphones for a long time. 6 Names and functions of parts EN A B C D E F G A POWER switch Use to turn the power ON and OFF. E DAMPING FACTOR knob This setting will change the audio quality depending on the headphones you are using, the music you are listening to and other factors. ) Use oo caution because changing the damping factor can cause the volume to increase greatly. [. . . ] 2 Shift the POWER switch to its ON position. Refer to the operation manual of that device. After setting the POWER switch to ON, the output oo will stay muted for about ten seconds while the circuits stabilize. end automatic muting after about ten seconds. [. . . ]