User manual TEAC HDD0050A

[. . . ] 3) Heed Warnings -- All warnings on the product and in the operating instructions should be adhered to. 4) Follow Instructions -- All operating and use instructions should be followed. 5) Cleaning -- Unplug this product from the wall outlet before cleaning. 6) Attachments -- Do not use attachments not recommended by the product manufacturer as they may cause hazards. [. . . ] This button is equivalent to the Center button on your iPod. You can mount the left and right speakers on a wall. Precautions < Be aware that the length of the cables are approximately 3 m. Do not attempt to mount the speakers too far from the subwoofer. < Drill holes into solid wall support, such as wooden frame or concrete wall. < TEAC supplies these brackets as a convenience to the product owner. Consult your local building codes and exercise all necessary caution when mounting these brackets. If you are unsure how to use the supplied brackets, consult with a local tradesmen or building supply expert. The provided Remote Control Unit allows the unit to be operated from a distance. When operating the remote control unit, point it towards the remote sensor on the front panel of the unit. < Even if the remote control unit is operated within the effective range, remote control operation may be impossible if there are any obstacles between the unit and the remote control. < When you don't use the Dock, use the supplied cover for the Dock to prevent dust from settling on the Dock. Fit the front edge of the adapter into the Dock, and then press the back edge of the adapter onto the Dock until a slight "click" is heard indicating the adapter is inserted correctly. In case your iPod will not work with the MC-DX32i or with the remote control unit, software update may solve the problem. < If you press and hold the TIME SET button for 3 seconds in CD or TUNER mode, the clock will be displayed for a few seconds. You can set a sleep timer so the unit turns itself off after a specified time. To adjust the level of low frequency sound range, press the bass button. To adjust the level of high frequency sound range, press the treble button. Within 5 seconds, press the VOLUME buttons to change the setting. SLEEP 90, 60 or 30: The power will be switched off 90, 60 or 30 minutes later. The level can be adjusted from ­5 to +5. < The MUTING indicator lights and the volume level blinks on the display to indicate that the muting is engaged. [. . . ] E The unit is too close to a TV or similar appliances. Install the unit apart from them, or turn them off. E Press the STANDBY/ON switch to turn the unit on. E When the battery has run out, put in a new one. [. . . ]