User manual TEAC LP-U200

[. . . ] This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. install in accordance with the manufacturer's instructions. [. . . ] MONO To compensate for weak FM stereo reception, select this mode. Reception will now be forced to monaural, reducing unwanted noise. < While recording from FM broadcast, noise may increase. To reduce uwanted noise, outdoor antenna will be required or record it with the FM mode switched to MONO. You can store FM and AM stations into preset channels 1 to 9 respectively. < Preset channels can also be selected using the numeric buttons of the remote control unit. To store more stations, repeat steps 1 to 4 . < Before use, completely loosen the transportation screw by turning them clockwise with a coin and remove the stylus guard. When playing a 45 RPM large hole single record, use the included adaptor. 5 Gently push the clamper to the right to release the tone Be careful not to pinch your finger. When the playback has been finished, the tone arm automatically returns to the tone arm holder and the rotation stops. To stop playback manually, slightly lift the tone arm using the cue lever and return it to the tone arm holder. 8 Gently lower the tone arm by slowly releasing the cue You can lower the tone arm manually if the cue lever has not been raised. El número de pistas restantes y el tiempo restante del disco cue lever Reproducción de archivos MP3 en el disco/USB/SD El número de archivo actual y el tiempo transcurrido del archivo actual Nombre de la carpeta / nombre del archivo (desplazamiento) < Playing records with the dust cover down will prevent dust from settling on the turntable. < Do not place anything on top of the turntable cover, especially while playing a record. This player can playback only music CDs and MP3 files. < It takes a few seconds for the unit to load the disc. Wait until the total number of the tracks and the total play time of the disc are displayed. < The disc must be placed in the center of the disc tray. If the disc is not correctly loaded, it may not be possible to open the tray again once it has closed, so you should ensure the disc is always centered on the tray. < Do not force the tray by hand during opening and closing operations. Disc playback starts from the first track, and y lights on the display. [. . . ] E Slide the lock switch of the SD memory card to unlock. If normal operation cannot be obtained, unplug the power cord from the outlet and plug it again. E If the disc is dirty, clean the surface of the disc. It may not be possible to play back CD-R/CD-RW discs. [. . . ]