User manual TEAC NS00010A

[. . . ] The Microserver will be ready when the Power LED stops flashing and stays solidly lit. If necessary, launch the Vendotto Manager software again to re-detect the NAS Microserver. holes: To hold the enclosed Vendotto markers. printer port: Connects to printer (25-pin, female connector). [. . . ] Before time expires, you must establish a static IP address using the Basic Setup menu in Vendotto Manager's WebTool (Figure 8). Select [Obtain an IP address automatically] if there is a DHCP server on your network. If there is no DHCP server on your network, select [Specify an IP address] and enter an IP address and subnet mask (i. e. , IP address: 192. 168. 11. 100, Subnet mask: 255. 255. 255. 0). 8 5 TEAC NAS Microserver Installation Guide (this document) Technical Support For technical support, please contact the TEAC Service and Support Center: floppy disks (2) AC adapter Power cable TEAC America, Inc. (USA) Technical Support Telephone: (323) 727-4860 · Fax: (323) 869-8751 Monday - Friday 8:00 a. m. - 5:00 pm PST http://www. teac. com/DSPD/techsupport. htm E-mail: dspdtsg@teac. com Vertical product stand Warranty TEAC NAS Microserver System reset key Figure 1. NAS Microserver Package Contents Note: If any of the items above is missing from your kit upon purchase, please contact your vendor immediately for a replacement kit. Front and Rear Panels Figure 4 illustrates the front and rear panels of the TEAC NAS Microserver. LAN COM USB PRINTER LAN DC IN 19V TEAC AD-8019(V) ONLY GND This product is warranted by TEAC America, Inc. against defects in materials and workmanship. LENGTH OF WARRANTY ­ This warranty will be effective for both labor and parts, and this warranty will be effective for one (1) year from the date of original purchase. WHO MAY ENFORCE THE WARRANTY - This warranty is valid only in the United States, and enforceable only by the original purchaser. This warranty is not valid outside the United States. Damage to or deterioration of the external cabinet. Damage resulting from accident, misuse, abuse, or neglect. Damage resulting from failure to follow instructions contained in your user's manual. Damage occurring during shipment of the product (claims must be presented to the carrier). Damage resulting from repair or attempted repair by anyone other than TEAC Service Department. Damage resulting from modification or attempted modification of product not authorized by TEAC. Damage resulting from causes other than product defects, including lack of technical skill, competence, or experience of the user. Damage to any unit which has been altered or on which the serial number has been defaced, modified or removed. Damage or malfunction resulting from installation and cabling. For wireless configurations, TEAC cannot be responsible for interference or operation in locations that restrict range. Damage to or from interconnected network equipment. HOW YOU CAN GET WARRANTY SERVICE ­ Please contact TEAC service department for Return Authorization number before shipping unit(s) to TEAC. Information required for R/A request should include your name and/or company name, telephone number, TEAC model, version and serial number(s). [. . . ] Vendotto Manager Displaying New IP Address 6. In the User Name field, key in Admin. This field is case-sensitive, so be sure to capitalize "A. " Leave the Password field blank. (You can assign a password later). 4. Click the OK button (Figure 7). Double-click on the NAS Microserver name [NAS] (Figure 5). Vendotto Manager will launch your system's web browser (Internet Explorer is used in these examples) and access the Vendotto WebTool on the Internet. [. . . ]