User manual TEAC PD-D2610

[. . . ] The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. 1) Read Instructions -- All the safety and operating instructions should be read before the product is operated. 2) Retain Instructions -- The safety and operating instructions should be retained for future reference. [. . . ] Use these buttons to select a track number. Use this button to enter the program mode. In program mode, use this button to enter selections. During playback, use these buttons to search the part you want to listen to. During playback, use this button to change the time display. Insert two "AA" dry batteries. Make sure that the batteries are inserted with their positive "+" and negative "_" poles positioned correctly. Battery Replacement If the distance required between the remote control unit and main unit decreases, the batteries are exhausted. In this case replace the batteries with new ones. < Be sure to insert the batteries with correct positive "+" and negative "_" polarities. Never use different types of batteries together. < When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries with new ones. < Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire. CAUTION: < Switch off the power to all equipment before making connections. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables. Connect this jack to the CD input jack of the amplifier with an RCA cable. Make sure to connect : white plug q white jack (L: left channel) red plug q red jack (R: right channel) < Keep the supplied cap to cover the optical digital terminal when it is not in use. After all other connections are complete, connect the plug to the AC wall socket. Be sure to connect the power cord to an AC outlet which supplies the correct voltage. [. . . ] E If the disc is dirty, clean the surface of the disc. E Use remote control unit within an effective range (5m) and point at the front panel. E Clear obstacles between the remote control unit and the main unit. E If a fluorescent light is near the unit, turn it off. [. . . ]