User manual TEAC R-4INT

[. . . ] Z FM/Internet-radio with iPod Dock R-4iNT OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of electrical shock, fire, etc. : 1) Read these instructions. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] To reset the setting, select "YES". < The unit completely erase all setting such as radio preset, WEP/ WPA codes and user setting. Software update Auto-check setting Selects software update automatically or manually. Setup wizard See "Setup wizard" on page 10. Info Displays the current software version and Radio ID. Set Time / Date 01 - 01 - 2009 00:00 The "day" value blinks. 2 / ) to set the current day, Press the Cursor botton ( and then press the SELECT button. Set Time / Date 04 - 01 - 2009 00:00 The "month" value blinks. < You can also use the MULTI JOG instead of the Cursor button ( / ). 3 Repeat step 2 to set "month", "year", "hour" and "minute". When "minute" is set, the clock starts. 13 Basic Operation This chapter describes the basic operation which is available in every mode. 3 Play the source, and adjust the volume using the Volume button ( or ). 1 Press the Standby/On button ( ) to turn the unit on. < The unit turns on with the source that was last selected. The volume can be adjusted from Muted (00) to Max (20). To reduce or turn up the volume continuously, hold down the Volume button ( or ). ) to put the unit in the < Press the Standby/On button ( standby mode when it is not being used. 2 Press the MODE button repeatedly to select a source. Dimmer You can change the brightness of the display. The selected source is shown on the display. Each time the MODE button is pressed, the source changes as follows: Internet radio Music player Pandora FM radio iPod Aux in < You can also use the FUNCTION buttons ( / ¥) on the remote control unit to select a source. Use the DIMMER button ( levels. ) to set the brightness one of three Full brightness Medium brightness Minimum brightness < Setting is cancelled if the Standby/On button ( ) is pressed. Muting You can mute the sound temporarily. To mute the sound, press the Muting button ( ). Press the Muting button ( ) again to restore the sound. < The Muting indicator ( ) appears on the display while muting is engaged. < If you change the volume when the sound is muted, it will be unmuted. 14 Equalizer You can adjust the sound according to the genre of music or your taste. My EQ profile setup Bass: 0 Treble: 0 Loudness: Off 1 Press the EQ button to enter the equalizer mode. 2 Press the Cursor botton ( / ) to select a item. Equalizer Normal Flat Jazz Rock Movie When you want to adjust "Bass" or "Treble". Press the SELECT button. 2 / ) to select a preset Press the Cursor botton ( equalizer and then press the SELECT button. / Press the Cursor button ( ) to adjust the value of the selected item, and then press the SELECT button. < The current setting is marked with a " Normal Flat Jazz Rock Movie Classic Pop News My EQ Equalizer is off. Flat sound quality with the bass adjustment. Provides a heavy powerful sound; suitable for rock music. A balanced sound; suitable for classical music. Emphasizes vocal tones; suitable for popular music. ". When you want to adjust "Loudness". Press the SELECT button to change "On" and "Off". 3 Press the EQ button. My EQ profile setup Set the equalizer by yourself (see below). "Save changes?" appears on the display. Setting the equalizer by yourself When you select "My EQ" in the equalizer mode, set the profile of "My EQ" as follows: 4 Press the SELECT button to select "YES". 1 Select "My EQ profile setup" in the equalizer mode (see above), and then press the SELECT button. Your customized equalizer is saved to "My EQ". [. . . ] Press the MODE button repeatedly to select "Music player" again. e Add the track to the media library of Windows Media Player. e Set your R-4iNT as a "Jupiter 6. 2 XXXXX (Radio ID)" in the device list of Windows (page 28). e Select "Allow" for R-4iNT ("Jupiter 6. 2 XXXXX (Radio ID)") (page 28). [. . . ]