User manual TEAC S1702D

[. . . ] PREFACE FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions: 1. This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] This switch is also a hot-key button to close the OSD menu while the OSD appears. 2. 3. 4. 6 Adjusting the Monitor's Display OSD Main Menu (Please refer to Chapter 1 for details on functions) To access the OSD main menu, press the OSD Menu button. Use the Function Select buttons to scroll between the OSD main menu options. The option that is currently selected is highlighted. Analog mode: Each main menu and submenu item is covered below. Pressing the OSD Menu button causes the following screen to appear (an example): Figure 2-2: The OSD Main Menu The Monitor-Control Option The Monitor-Control option allows you to adjust the LCD monitor's display characteristics. With the Monitor-Control icon selected, press the Function Enter button to display the submenu. Use the Function Enter buttons to select one of the following submenu options: AUTO-ADJUST : Use the Adjustment Control buttons to apply the automatic monitor settings. 7 H-POSITION: Use the Adjustment Control buttons to move the LCD monitor's display left or right on a horizontal plane. V- POSITION: Use the Adjustment Control buttons to move the LCD monitor's display up or down on a vertical plane. PHASE: Use the Adjustment Control buttons to adjust the focus and clarity of the display. CLOCK: Use the Adjustment Control buttons to adjust the display pixel number alignment. RESET: Pressing either of the Adjustment Control buttons resets H- Position, V-Position, Phase and Clock parameters. GRAPH. /TEXT: Press the Function Enter button to switch between the text and graphic options. PORT-SELECT: Press the Adjust buttons to change input between VGA port and DVI digital port (optional). EXIT: Pressing the Function Enter button exits the Monitor-Control submenu. OSD-Control Option The OSD-Control menu option lets you adjust the position of the OSD on the screen. With the OSD-Control icon selected (use the Function select buttons), press the Function Enter button to display the submenu. Use the Function Select buttons to select one of the following submenu options: OSD-H-POSITION: Use the Adjustment Control buttons to change the position of the OSD on a horizontal plane. OSD-V- POSITION: Use the Adjustment Control buttons to change the position of the OSD on a vertical plane. OSD-TIMER : Use the Adjustment Control buttons to change the OSD display time. 8 EXIT: Pressing the Function Enter button exits the OSDControl submenu. Graphic-Control Option The Graphic-Control option lets you make adjustments that effect the contrast, brightness and color of the LCD monitor's display. With the Graphic-Control icon selected, press the Function Enter button to display the submenu. Use the Function Select buttons to select one of the following submenu options: CONTRAST: Use the Adjustment Control buttons to adjust the difference between the lightest and darkest areas of the LCD monitor's display screen. BRIGHTNESS: Use the Adjustment Control buttons to adjust the light level on the LCD monitor's display screen. It should be adjusted in conjunction with the Contrast item. COLOR: Use either of the Adjustment Control buttons to select the LCD monitor's color display. [. . . ] In Windows, load a wallpaper bitmap that has vertical lines in it. (or you can select the window shut down screen) After you have the wallpaper loaded, open the OSD and select the "Clock" function. Press the top (or bottom) Adjustment Control button and continue pressing the button until you see vertical dark and light lines across the screen. When you can see distinct light and dark vertical bands, stop pressing the Adjustment Control button. [. . . ]