User manual TEAC W-865R

[. . . ] 9) A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. 10) Ventilation -- Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. [. . . ] Turning the pitch control knob clockwise increases the playback speed and raises the pitch up to +10%. Turning the pitch control knob counterclockwise reduces the playback speed and lowers the pitch by a maximum of ­10%. Plug your headphones into the PHONES jack, and put on the headphones. Plugging into the PHONES jack does not disable the line outputs. cAUTION There is no level control for the headphones output. Beware that sudden loud sounds may occur depending on recorded material. You should avoid prolonged exposure to high volume sound as this can damage your hearing. Continuous playback can be performed between TAPE I and TAPE II. When one tape is played back to the end, the other tape automatically starts playback, in a relay fashion. The Blank Scan function detects 10 seconds or more of blank and skips over it. To activate this function, press the BLANK SCAN button followed by the desired play button (h or y). Always set the Dolby NR switch to the same position that was used for recording. < The BLANK SCAN indicator lights when this function is activated. < Very quiet passages in music are likely to be identified as blanks. If you are worried about this, switch off Blank Scan. 4 Press the play button (h or y) of the deck you want to You can start continuous playback from either TAPE I or TAPE II. Playback will automatically stop when both sides of both tapes have been played back 5 times continuously. This cassette deck is equipped with the Computomatic Program Search (CPS) function. This function detects blank spaces (longer than 4 seconds) between songs and fast-winds the tape in the forward or backward direction skipping over the specified number of songs, thus allowing direct access to the beginning of a desired song. CPS can skip up to 20 songs ahead of or behind the current song. When you press the m or , button during playback, the tape counter reads "CP 01" and the tape starts running at high speed in the pressed direction. Each time you press the same direction button, the displayed number increases by one integer. [. . . ] Noisy playback e Keep away from equipment that generates a magnetic field, such as a TV or microwave oven. E If the erasure prevention tabs on top of the cassette are broken off, cover the holes using pieces of adhesive tape. This cassette deck operates on a delicate microcomputer and there may be occasions when the deck does not function as expected because of external noise or interference. Problems you encounter on such occasions may be cured by turning off the power, waiting for 1 minute or more, then turning the power back on. [. . . ]