User manual TECHNICS SL-12110MK2 SERVICE MANUAL

[. . . ] The CHA-S624 is a high-performance 6-disc changer with a new M DAC, Ai-NET compatibility, Optical Digital Output, 150 Disc Title Memory and CD TEXT. The CHA-1214 Ai-NET model holds 12 discs, and the CHM-S620 M-Bus model is a super-compact 6-disc changer. The exclamation point within an equilateral triangle and "WARNING" are intended to alert the user to the presence of important operating instructions. Doing so may result in personal injury or damage to the product. [. . . ] Each press changes the band: FM1 FM2 MW LW The tuner will automatically seek and store 6 strong stations in the selected band in order of signal strength. The frequency on the display continues to change while the automatic memory is in progress. When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. NOTE If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme. The F button changes to green (CDM-7857RB/ CDE-7855RB/SL-12110MK2/CDE-7853R), orange (SL-12110MK2M). NOTE When the BAND button is pressed and held for more than 2 seconds while a station name is displayed, the display shows the station frequency for 5 seconds. The F button changes to green (CDM-7857RB/ CDE-7855RB/SL-12110MK2/CDE-7853R), orange (SL-12110MK2M). press the AF button to activate the RDS mode. The display shows "AF" when the RDS mode is activated. Make sure that the F button lights red, then press the preset location button in which your desired RDS station is preset. If the volume level is changed while receiving traffic information, the changed volume level will be memorized. When traffic information is received next time, the volume level will be automatically adjusted to the level memorized. When a traffic information broadcast starts, the unit automatically mutes the CD player/ changer or the regular FM broadcast. When the traffic information broadcast finishes, the unit automatically returns to the original source play before the traffic information broadcast began. When traffic information stations cannot be received: In the tuner mode: When the TP signal can no longer be received for over 1 minute, the "T. In the CD mode: When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically. NOTE The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternate frequencies to the AF list. The EON indicator appears while an RDS EON station is being received. If the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information when it occurs. Press and hold the PTY button for at least 2 seconds to activate the PTY mode. The Programme Type of the station being currently received will be displayed for 5 seconds. [. . . ] Slide mounting sleeve from main unit (see Removal Procedure below). 2 Use a small screwdriver (or similar tool) to push the locking pins to the "up" position (see Fig. As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin. 3 Pull the unit out, keeping it unlocked as you do so. [. . . ]