User manual TECHNICS SL-BD20 SERVICE MANUAL

[. . . ] Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product. Using This Instruction Manual • All major sections and subsections are listed in the Table Of Contents (੬ pg. • Notes appear after most subsections. • Basic and advanced features/operation are separated for easier reference. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Warning on lithium cell battery (for remote control unit) The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 100°C (212°F) or incinerate. [. . . ] 61, referring to “Superimposing A Title/Frame” ( ੬ pg. 69). TO CREATE A MULTI-IMAGE SCREEN USING THE SAME IMAGE Before doing the following, perform steps 1 through 3 above. 4 SELECT MODE Rotate MENU/SET until the “SAME 4” or “SAME 16” appears. A Multi-Image screen displaying 4 or 16 frames of the same image appears. Set “MULTI VIEW” to “OFF” in the Playback Menu. 5 CREATE MULTI-IMAGE SCREEN 6 END MULTI-IMAGE SCREEN OR Press 3 or 2 to display another image. EN TO CREATE A MULTI-IMAGE SCREEN USING SELECTED IMAGES 61 Before doing the following, perform steps 1 through 3 (੬ pg. 60). 4 SELECT MODE MENU/SET Dial Rotate MENU/SET until “SELECTED 4” appears and press it. The Multi-Image Index Screen appears. 5 SELECT IMAGES Playback Menu Rotate MENU/SET to move the green frame to the desired image and press it. A check mark “ ” appears on the selected image. Repeat this procedure for all 4 images to be selected. •To cancel the selection of an image, rotate MENU/ SET to move the green frame to the desired image and press it. The check mark “ ” disappears. Display INDEX SLIDE SHOW 4 MULTI VIEW IrTran-P PROTECT FILE DELETE TITLE DELETE FORMAT END SELECTED 4 OFF 6 CREATE MULTI-IMAGE SCREEN Multi-Image Index Screen Rotate MENU/SET upward to select “EXIT” and press it. The Multi-Image screen of the selected images appears. The DELETE Index Screen appears. FILE DELETE 5 SELECT IMAGE Rotate MENU/SET to move the green frame to the desired image that you wish to delete and press it. An “ ” appears above the selected image. Repeat this procedure for all images that you wish to delete. To deselect an image, press MENU/SET again. Rotate MENU/SET upward to select “NEXT” and press it. The Deletion Confirmation Screen appears. Rotate MENU/SET to select “EXECUTE” and press it. The selected images are deleted and the normal playback screen appears. •If you wish to cancel deletion, rotate MENU/SET to select “CANCEL” and press it. DELETE 002 S 003 E DELETE Index Screen 6 END SELECTION 7 DELETE IMAGE 005 F 006 F Deletion Confirmation Screen CAUTION: While deleting images, never remove the MultiMediaCard or disconnect power, as this may cause the memory to be corrupted. Also, be sure to use the AC Power Adapter/Charger, as a malfunction may occur if the battery become exhausted halfway through the operation. EN TO DELETE ALL IMAGES MENU/SET Dial 65 Before doing the following, perform steps 1 through 3 (੬ pg. 64). 4 SELECT MODE Rotate MENU/SET to select “ALL” and press it. [. . . ] Keep it away from direct sunlight. EN Declaration of Conformity Model Number : CU-V501U Trade Name : TECHNICS Responsible party : US TECHNICS CORP. 07470 Telephone Number : 973-315–5000 This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 109 About moisture condensation . ● You have observed that pouring a cold liquid into a glass will cause drops of water to form on the glass‘ outer surface. [. . . ]