User manual TECHNICS SL-PG360A service manual

[. . . ] 1 PLAYBACK PLAYING 1 OR 2 CDS . . . . . . . . . . . . . . . . . . . . 22 Basic Playback Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Relay Playback of 2 CDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Searching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If a disc cannot be digitally copied, analog copy is possible. To make an analog copy, set the "SCMS Mode" to "ANALOG" in the menu settings. Repeat steps 5, 6 and 7 to record another track. · 9. Press a when all recording is complete. Disc information is being written to the PMA (Program Memory Area). When all recording is complete, perform finalization. (See page 21 for the finalization procedure. ) E-16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RECORDING FUNCTIONS I All track synchronized recording This mode is convenient for recording all of the material from a single audio source such as an MD, cassette tape, or LP. Track markers are automatically placed between the tracks being recorded. I Full AUTO synchronized recording with finalization This mode automatically performs finalization after all synchronized recording is complete. (See page 21 for the finalization procedure. ) GETTING STARTED 1-5. Repeat the steps described in the previous section "Single track synchronized recording". 1-5. Repeat the steps described in the section "Single track synchronized recording". 6. Press REC MODE twice. ALL and SYNCHRO indicators light in the display. 6. Load a CD-RW disc that has been finalized. Press ERASE. · "Erase TOC?" appears in the display. · To cancel the Erase mode, press a. I Last Track Erase This operation erases the last track. Last Track Erase cannot be done if a CD-RW disc has been finalized or only one track has been recorded on the disc. 3. Press w/d (w on the remote) to start TOC Erase. · This operation requires approximately 80 seconds to complete. · During TOC Erase, "Erasing" appears in the display, and the approximate amount of elapsed time is displayed. 1. Load a CD-RW disc that has been recorded on. · This operation is not possible on a finalized CD-RW disc. 2. Press ERASE. · "Erase LAST?" appears in the display. · Proceed to the next step when erasing only the last track. To erase other tracks as well, select the track number from which you wish to start erasing by rotating the MULTI JOG knob counterclockwise. · To cancel the Erase mode, press a. 4. [. . . ] Pin jack Standard output level (1 kHz, 0 dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2. 0 ± 0. 5 Vrms DIGITAL OUT OPTICAL Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Square optical connector jack PHONES Standard output level (Input 150 ohms shorted, ­20 dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 mV/150 ohms ENGLISH E-31 CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. [. . . ]