User manual TEFAL QUICK CUP

[. . . ] This cartridge contains an anti-lime substance and activated carbon that reduces chlorine, impurities, lead, copper, pesticides, etc that are present in water. Minerals and trace elements, however, are preserved. Take note of the month in which the cartridge is put into use by sliding the upper ring on the filter to the use start date fig 4. You should change your Claris Filter Cartridge every 4 to 6 weeks (or every 50 litres), according to the hardness of your water. [. . . ] Finally confirm the recorded amount by simultaneously pressing buttons G and H fig 7. The light will turn off at the end of the programming mode. To programme the amount for the ambient water button G, follow the same procedure as for programming the hot water button H, pressing the ambient water button G to obtain the desired amount of water fig 10. 7 The models with a quantity selector offer an additional function: you can adjust the amount of water automatically delivered to your container. To do this, select the chosen amount on the rotary button I, according to your container, then briefly press the hot water button H to obtain hot water or the ambient water button G to obtain ambient water; the water flow will stop automatically fig 11. 8 If you are using small cups, we recommend that you hold the cup close to the nozzle E to avoid any splashes. 9 To ensure minimal energy consumption from this appliance please switch off your plug point when the product is in use. Descaling your appliance In order to optimise the lifetime of your appliance, we recommend that you descale it at least every 2 months. Descaling should be carried out more frequently if you live in a very hard water area. Certain models also have an indicator light K, which indicates when descaling is necessary. When this indicator K is on during use, it is time to descale the appliance. To descale: 1 Remove the Claris filter cartridge fig 6. 2 Place a container of at least 1. 5 litres under the nozzle. 6 Notice Tefal GB:Mise en page 1 19/03/07 17:21 Page 7 3 Empty the tank A, if it is still full of water, then reposition it on its base fig 2. 4 Pour 1 litre of commercially available white vinegar at 8° into the tank. 5 Press the hot water button H and the ambient water button G simultaneously for at least 5 seconds fig 7. You have the possibility of launching a descaling cycle even if the indicator light K is not on. To do this, press the hot water button H and the ambient water button G simultaneously for at least 10 seconds 6 The descaling cycle thus runs automatically for approximately 10 minutes. The indicator turns off at the end of the cycle. 7 When the cycle has come to an end, empty the container and refill the water tank to a maximum. Relaunch a new operation for rinsing the appliance by holding down one of the buttons fig 3 and fig 10. 8 Once this last cycle has finished, reposition the Claris cartridge; your appliance is ready for use once more fig 6. Never use any other descaling method than that advised. Cleaning and maintenance Do not immerse the appliance in water. Do not put the appliance in the dishwasher. · Systematically disconnect the power supply cable before any maintenance operation. [. . . ] · Any error in electrical connection negates the warranty. · Disconnect the appliance as soon as you have finished using it for a while or when cleaning. · All appliances are subject to severe quality inspection. Practical tests using appliances taken at random are conducted and this may explain any marks showing prior use. [. . . ]