User manual TEKTRONIX 80C07B DATASHEET

[. . . ] 80C10B Multirate Datacom and Telecom 40 Gb/s The 80C10B module provides integrated and selectable reference receiver filtering, enabling conformance testing at either and 100 Gb/s 1310 nm or 1550 nm for 39. 813 Gb/s (OC-768/STM-256), 41. 25 Gb/s (40GBase-LR), and 43. 018 Gb/s [OTU3, (4×10G LAN PHY)] rates. In addition to the filter rates, the user may also choose selectable bandwidths of 30 GHz, 65 GHz, and 80 GHz for 80C10B for optimal noise vs. bandwidth performance for accurate signal characterization. The 80C10B is optionally available with Option F1 which extends filter selections to include 27. 739 Gb/s (100GBase-LR4 + FEC and 100GBase-ER4 + FEC), and 25. 781 Gb/s (100GBase-LR4 and 100GBase-ER4 ). [. . . ] *6 Bandwidths shown are warranted unless printed in an italic typeface which represents a typical value. 80C08C, 80C12: Bandwidths and optical filters valid for OMA 500 uW (1550/1310 nm), OMA 860 uW (850 nm), OMA 1020 uW (780 nm). Note: Refer to Optical Sampling Modules User Manual for more detailed information. 6 www. tektronix. com Optical Sampling Modules -- 80C07B · 80C08C · 80C10B · 80C11 · 80C12 · 80C25GBE Optical Sampling Module Characteristics (Cont. ) Module Clock Recovery (Optional) Clock Recovery Outputs Unfiltered Optical Bandwidth*6 Absolute Maximum Nondestructive Optical Input Internal Fibre Diameter 80C07B 80C08C Option CR1: 155 Mb/s, 622 Mb/s, 1. 063 Gb/s, 1. 250 Gb/s, 2. 125 Gb/s, 2. 488 Gb/s, 2. 500 Gb/s, 2. 666 Gb/s Option CR1: 9. 953 Gb/s, 10. 31 Gb/s; Option CR2: 10. 31 Gb/s, 10. 52 Gb/s; Option CR4: Continuous from 9. 8 Gb/s to 12. 6 Gb/s ±Clock, ±Data 2. 5 GHz 5 mW average; 10 mW peak power at wavelength of highest responsivity 1 mW average; 10 mW peak power at wavelength of highest responsivity 62. 5 m/125 m Multi Mode 62. 5 m/125 m Multi Mode Clock, Clock/16 10 GHz 80C10B*6 80 GHz 80C11 80C12 Option CR1: 9. 953 Gb/s; Option CR2: 9. 953 Gb/s, 10. 664 Gb/s; Option CR3: 9. 953 Gb/s, 10. 709 Gb/s; Option CR4: Continuous between 9. 8 Gb/s to 12. 6 Gb/s Provided by 80A05 or 80A07 (sold separately) CR1: Clock, Clock/16, Data; CR2, CR3, CR4: Clock, Clock/16 30 GHz 20 mW average; 60 mW peak power at wavelength of highest relative responsivity 5 mW average; 10 mW peak power at wavelength of highest responsivity 9 m/125 m Single Mode 9 m/125 m Single Mode ELECTRICAL SIGNAL OUT 9 GHz (for all options except 10G) 10 GHz (Option 10G) 1 mW average; 10 mW peak power at wavelength of highest responsivity 62. 5 m/125 m Multi Mode *6 Bandwidths shown are warranted unless printed in an italic typeface which represents a typical value. 80C08C, 80C12: Bandwidths and optical filters valid for OMA 500 uW (1550/1310 nm), OMA 860 uW (850 nm), OMA 1020 uW (780 nm). Optical Sampling Module Characteristics (Cont. ) Module Optical Return Loss Fibre Input Accepted RMS Optical Noise (Typical) RMS Optical Noise (Maximum) Independent Channel Deskew 80C07B 80C08C 80C10B >14 dB (Multi Mode) Single or Multi Mode >24 dB (Single Mode) >14 dB (Multi Mode) Single or Multi Mode >24 dB (Single Mode) >30 dB Single Mode 0. 50 W at 155 Mb/s, 622 Mb/s, 1063 Mb/s, 1250 Mb/s; 0. 70 W at 2. 488/2. 500 Gb/s 1. 7 W at all filter rates (1550/1310 nm, no CR) 1. 0 W at 155 Mb/s, 622 Mb/s, 1063 Mb/s, 1250 Mb/s; 1. 5 W at 2. 488/2. 500 Gb/s 3. 0 W at all filter rates (1550/1310 nm) 1310 nm 1550 nm 28 uW (25. 8, 38 uW (25. 8, 27. 7 Gb/s) 27. 7 Gb/s) 35 uW (30 GHz) 45 uW (30 GHz) 50 uW (39. 8 Gb/s 38 uW (39. 8 Gb/s - 43. 0 Gb/s) - 43. 0 Gb/s) 60 uW (65 GHz) 75 uW (65 GHz) 105 uW (80 GHz) 130 uW (80 GHz) 8. 0 W at all filter rates; 10. 0 W at 14. 025 GHz 14. 0 W at 20 GHz 30. 0 W at 30 GHz 2. 5 W (all filters except Option 10G) 5. 0 W ('Full BW' and Option 10G filters) 1310 nm 38 uW (25. 8, 27. 7 Gb/s) 75 uW (65 GHz) 1550 nm 28 uW (25. 8, 27. 7 Gb/s) 60 uW (65 GHz) Standard Standard Standard 80C11 80C12 80C25GBE 1310 nm 1550 nm 15 uW (25. 8, 21 uW (25. 8, 27. 7 Gb/s) 27. 7 Gb/s) 19 uW (30 GHz) 26 uW (30 GHz) 28 uW (39. 8 Gb/s 20 uW (39. 8 Gb/s - 43. 0 Gb/s) - 43. 0 Gb/s) 33 uW (65 GHz) 44 uW (65 GHz) 55 uW (80 GHz) 72 uW (80 GHz) >30 dB Single Mode 5. 5 W at all filter rates; 7. 0 W at 14. 025 GHz 10. 0 W at 20 GHz 20. 0 W at 30 GHz 1. 3 W (all filters except Option 10G) >14 dB (Multi Mode) Single or Multi Mode 2. 4 W ('Full BW' and Option 10G filters) >24 dB (Single Mode) >30 dB 1310 nm 1550 nm Single Mode 15 uW (25. 8, 21 uW (25. 8, 27. 7 Gb/s) 27. 7 Gb/s) 33 uW (65 GHz) 44 uW (65 GHz) Standard Standard Standard www. tektronix. com 7 Data Sheet Optical Sampling Module Characteristics (Cont. ) Module Offset Capability Power Meter Power Meter Range Power Meter Accuracy Mask Test Optical Sensitivity*7 80C07B Standard Standard +4 dBm to ­30 dBm 5% of reading 80C08C 80C10B, 80C25GBE Standard Standard Standard Standard 0 dBm to ­30 dBm +13 dBm to ­21 dBm 5% of reading 5% of reading 80C11 80C12 Standard Standard Standard Standard +4 dBm to ­30 dBm 0 dBm to ­30 dBm 5% of reading 5% of reading ­22 dBm at 155 Mb/s, 622 Mb/s; ­20 dBm at 2488/2500 Mb/s ­16 dBm at all filter rates 25. 8 and 27. 7 Gb/s: ­8 dBm (1550 nm) and ­7 dBm (1310 nm); 39. 813 to 43. 018 Gb/s: ­7 dBm (1550 nm) and ­6 dBm (1310 nm) ­12 dBm at all filter rates; ­5 dBm at 20 GHz; ­6 dBm at 30 GHz ­19 dBm (for all options except Option 10G) ­14 dBm (for Option 10G) *7 Smallest power level for mask test. Values represent theoretical typical sensitivity of NRZ eyes for comparison purposes. Assumes instrument peak-peak noise consumes most of the mask margin. Optical Sampling Module Characteristics (Cont. ) Module Extinction Ratio Calibrated Accuracy (Opt. 01 ER Calibrated)*8 Accuracy Reference Filter Repeatability (Typical) in Range (Gb/s) (to itself and to other 80Cxx-Opt. 01) Ordering Information 80C07B Multirate Datacom and Telecom Optical Sampling Module. Includes: User Manual, FC/PC Optical Connector. 80C08C 80C07B 80C08C 80C10B 80C11 -- 9. 9. . . 11. 3 -- 9. 9. . . 11. 3 Option not available ±0. 6% (­0. 39 dB / ±1. 2% (­0. 76 dB / +0. 42 dB at 12 dB) +0. 92 dB at 12 dB) Option not available ±0. 6% (­0. 39 dB / ±1. 2% (­0. 76 dB / +0. 42 dB at 12 dB) +0. 92 dB at 12 dB) Multirate Datacom and Telecom Optical Sampling Module. Includes: User Manual, FC/PC optical connector. 80C10B*7 Multirate Optical Sampling Module ­ 80 GHz. Includes: User manual, FC/PC optical connector. *8 Low ER signals (ER 6 dB): signal passes 802. 3ae-like mask (scaled horizontally for bit rate); 105 samples in mask. High ER signals (ER > 6 dB): signal passes OC-192-like mask (scaled horizontally for bit rate); 105 samples in mask. 80C11 Multirate Datacom and Telecom Optical Sampling Module. Includes: User Manual, FC/PC optical connector. Multirate Datacom and Telecom Optical Sampling Module. Includes: User Manual, FC/PC optical connector. Clock recovery is available using the 80A05 or 80A07. The 80C12 Multirate Telecom and Datacom Optical Sampling Module is available with a wide variety of factory-configured signal conditioning options. These options provide a variety of reference receiver filtering and unfiltered signal acquisition bandwidths. The user must specify one of the following options when ordering this module. Physical Characteristics Module Width Dimensions (mm/in. ) Height Depth Weight (kg/lb. ) Net 80C12 80C07B 80C08C 80C10B 80C11 80C12 80C25GBE 165/6. 5 165/6. 5 165/6. 5 165/6. 5 165/6. 5 165/6. 5 25/1. 0 25/1. 0 25/1. 0 25/1. 0 25/1. 0 25/1. 0 305/12. 0 305/12. 0 305/12. 0 305/12. 0 305/12. 0 305/12. 0 <1. 36/<3. 0 <1. 22/<2. 7 <2. 61/<5. 75 <1. 22/<2. 7 <2. 61/<5. 75 <2. 61/<5. 75 80C25GBE Multirate Optical Sampling Module ­ 65 GHz. Includes: User manual, FC/PC optical connector. 8 www. tektronix. com Optical Sampling Modules -- 80C07B · 80C08C · 80C10B · 80C11 · 80C12 · 80C25GBE Options Option 80C07B Description Service Option Description Opt. F10 80C08C 155/622/1063/1250/2125/2488/2500/2666 Mb/s clock/data recovery. User must select any one (1) of the following filter options: 155, 622 Mb/s 155, 1063 Mb/s 155, 1250 Mb/s 155, 2125 Mb/s 622, 1063 Mb/s 622, 1250 Mb/s 622, 2125 Mb/s 1063, 1250 Mb/s 1063, 2125 Mb/s 1250, 2125 Mb/s 9. 953, 10. 31 Gb/s clock recovery 10. 31, 10. 52 Gb/s clock recovery Continuous rate clock recovery supporting any standard or user-definable rate in the range from 9. 8 to 12. 6 Gb/s ER Calibrated (when ordered with new module); module will only work on mainframe with Windows XP and oscilloscope FW V 5. 0 and higher. [. . . ] Assumes instrument peak-peak noise consumes most of the mask margin. www. tektronix. com 9 Data Sheet 10 www. tektronix. com Optical Sampling Modules -- 80C07B · 80C08C · 80C10B · 80C11 · 80C12 · 80C25GBE www. tektronix. com 11 Data Sheet Contact Tektronix: ASEAN / Australasia (65) 6356 3900 Austria +41 52 675 3777 Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Belgium 07 81 60166 Brazil +55 (11) 3759-7627 Canada 1 (800) 661-5625 Central East Europe, Ukraine, and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401 Finland +41 52 675 3777 France +33 (0) 1 69 86 81 81 Germany +49 (221) 94 77 400 Hong Kong (852) 2585-6688 India (91) 80-42922600 Italy +39 (02) 25086 1 Japan 81 (3) 6714-3010 Luxembourg +44 (0) 1344 392400 Mexico, Central/South America & Caribbean 52 (55) 54247900 Middle East, Asia, and North Africa +41 52 675 3777 The Netherlands 090 02 021797 Norway 800 16098 People's Republic of China 86 (10) 6235 1230 Poland +41 52 675 3777 Portugal 80 08 12370 Republic of Korea 82 (2) 6917-5000 Russia & CIS +7 (495) 7484900 South Africa +27 11 206 8360 Spain (+34) 901 988 054 Sweden 020 08 80371 Switzerland +41 52 675 3777 Taiwan 886 (2) 2722-9622 United Kingdom & Ireland +44 (0) 1344 392400 USA 1 (800) 426-2200 For other areas contact Tektronix, Inc at: 1 (503) 627-7111 Updated 5 August 2009 For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www. tektronix. com Copyright © Tektronix, Inc. and foreign patents, issued and pending. [. . . ]