User manual TEKTRONIX AWG7102 DATASHEET

[. . . ] Higher and higher data rates are required, and the performance of cables and circuits is moving closer to their theoretical limits. One technique to increase the data rate without increasing the transition rate is by applying multilevel signals, wherein a signal can assume more than the standard binary 2 levels. In multilevel signaling one can think of multilevel discrete amplitudes of a signal. This phenomenon is known as Pulse Amplitude Modulation or PAM. [. . . ] The AWG7000 Series enables the direct generation of RF signals and their output through the D/A converter for signals up to a carrier frequency of 5 GHz and a bandwidth of 5. 8 GHz. The direct generation of IF or RF signals avoids I/Q degradations and lengthy adjustments associated with traditional generation using I/Q modulators. The AWG7000 Series with its maximum sample rate of 20 GS/s is the sole solution that allows a direct RF signal generation for up to 5 GHz. See Figure 4. www. tektronix. com 3 Data Sheet Additional Software Application Tools Extending Waveform Generation RFXpress (RFX100) RFXpress is a software package that synthesizes digitally modulated baseband, IF, and RF signals. It takes IQ, IF, and RF signal generation to the next level and fully exploits the wideband signal generation capabilities of Arbitrary Waveform Generators (AWGs). Supporting a wide range of modulations, as well as the symbol map functions, the software allows you to define your own modulation. UWB-WiMedia signal creation, a software module for RFXpress, has the capability to digitally synthesize and generate RF signals in Band Groups 1 and 2 of the UWB spectrum. As per the latest WiMedia specification, signals will band hop in real-time over 1. 5 GHz modulation bandwidth including all the different preamble synchronization sequences, cover sequences, TFCs, and band groups. All six band groups (BG1 to BG6) can be generated with band hopping in either IQ or IF. The conformance mode enables you to generate all signals that conform to WiMedia's specifications, while the custom mode allows you to adjust the signals for stress and margin testing. SerialXpress® (SDX100) SerialXpress enables creation of exact waveforms required for thorough and repeatable design validation, margin/characterization, and conformance testing of high-speed serial data receivers. It considerably simplifies the signal creation and Jitter simulations, thus reducing overall development and test time. In addition to supporting generation of Jitter (Random, Periodic (sinusoidal), ISI, and DCD) SerialXpress also supports SSC, pre-emphasis, and noise addition. This allows the user to create a combination of various impairments simultaneously to stress the receiver. Both RFXpress and SerialXpress are powerful easy-to-use software packages to synthesize RF and high-speed serial data signals respectively for arbitrary waveform generators (AWG). It runs as an integral part of the AWG7000 Series arbitrary waveform generators or from an external PC. 4 www. tektronix. com Arbitrary Waveform Generator -- AWG7102 · AWG7101 · AWG7052 · AWG7051 Characteristics Arbitrary Waveforms Characteristic AWG7102 AWG7101 AWG7052 AWG7051 Waveform Length 2 to 32, 400, 000 points (or 2 to 64, 800, 000 points, Option 01) in multiples of 64 Interleave: 2 to 64, 800, 000 points (or 2 to 129, 600, 000 points, Option 01) in multiples of 128 2 to 32, 400, 000 points (or 2 to 64, 800, 000 points, Option 01) in multiples of 64 Number of Waveforms Sequence Length Sequence Repeat Counter Sequence Control Jump Mode Run Modes Continuous Triggered Gated Sequence Interleave operation Clock Generator Sampling frequency Resolution Internal Clock Accuracy Clock phase noise Internal Trigger Generator 1 to 16, 000 1 to 4, 000 steps 1 to 65, 536 or infinite Repeat count, Wait for Trigger, Go-to-N, and Jump Synchronous and Asynchronous Waveform is iteratively output. current Connector 4 (2 per channel) 2 Differential 50 SMA Front 4 (2 per channel) 2 -1. 4 V to +1. 4 V 0. 5 Vp-p to 1. 4 Vp-p 10 mV -2. 8 V to +2. 8 V ±(10% of setting + 50 mV) 45 ps (1. 0 Vp-p, Hi +1. 0 V, Lo 0 V) <13 ps (between each channel (+) Pos and (­) Neg output) (typical) <30 ps (between Marker 1 and Marker 2 output) (typical) 0 to 300 ps 1 ps ±(5% of setting + 50 ps) 1010 clock pattern 1 ps 215-1 PN data pattern (at 10-12 BER) 30 psp-p 1. 2 Vp-p into 50 . Max 2. 5 Vp-p open 50 , AC coupling BNC Rear 4: Independently controlled outputs -3. 0 to +5. 0 V 10 mV ±30 mA 2×4 Pin Header on front panel 30 psp-p 1 ps www. tektronix. com 9 Data Sheet Auxiliary Inputs Characteristic AWG7102 AWG7101 AWG7052 AWG7051 Trigger/Gate In Impedance Polarity Connector Input Voltage Range Threshold Level Resolution Trigger to output uncertainly Asynchronies between internal/external clock and trigger timing (typical) Synchronize between external clock and trigger timing (typical) Synchronize between external 10 MHz reference and trigger timing (typical) Trigger Mode Minimum pulse width Trigger hold-off Delay to analog out Gated Mode Minimum pulse width Delay to analog out Event Input Impedance Polarity Connector Input voltage range Threshold level Resolution Sequence Mode Minimum pulse width Event hold-off Delay to analog out External Clock IN Input voltage swing Impedance Frequency range Clock divider Connector Fixed Reference Clock IN Input voltage range Impedance Frequency range Connector Variable Reference Clock IN Input ranges Input voltage range Impedance Multiplier rate Connector 1 k or 50 POS or NEG BNC Front 1 k: ±10 V 50 : ±5 V -5. 0 V to 5. 0 V 0. 1 V 2. 2 ns at 10 GS/s, 2. 6 ns at 7 GS/s, 3. 4 ns at 5 GS/s 10 GS/s x1 clock divider: 8 clock + 50 psp-p 10 GS/s x1 clock divider with specific timing: 50 psp-p, 10 psRMS The ambient temperature variant allows only ±5 10 GS/s setting: 8 clock + 150 psp-p 10 GS/s setting with specific timing: 150 psp-p, 30 psRMS The ambient temperature variant allows only ±5 20 ns 832 × sampling_period - 100 ns 128 × sampling_period + 250 ns 1024 × sampling_period + 10 ns 640 × sampling_period + 260 ns 1 k or 50 POS or NEG BNC Front 1 k: ±10 V 50 : ±5 V -5. 0 V to 5. 0 V 0. 1 V 20 ns 900 × sampling_period + 150 ns 1024 × sampling_period + 280 ns (Jump timing: Asynchronous jump) +5 to +11 dBm 50 , AC coupled 5 GHz to 10 GHz: (acceptable frequency drift is ±0. 5%) 1/1, 1/2, 1/4. . . . . . 1/256 1/2, 1/4. . . . . . 1/256 SMA Rear 0. 2 Vp-p to 3. 0 Vp-p 50 , AC coupled 10 MHz, 20 MHz, 100 MHz (with ±0. 1%) BNC Rear 5 MHz to 800 MHz (acceptable frequency drift is ±0. 1%) 0. 2 Vp-p to 3 Vp-p 50 , AC coupled 1 to 2000 1 to 1000 BNC Rear 1 to 2000 (2 to 4000 at interleave) 10 www. tektronix. com Arbitrary Waveform Generator -- AWG7102 · AWG7101 · AWG7052 · AWG7051 AWG7000 Series Common Features Characteristic Description Physical Characteristics Dimension mm in. Tektronix DPO7000/TDS5000/6000/7000 (*. wfm), TDS3000 (*. ISF) AWG400s/500s/610/615/710/710B (*. wfm, *. pat, *. seq) Text data file (third-party software creation waveform data: MATLAB, MathCad, Excel) S/W Driver for Third-party IVI-COM driver S/W Instrument Control / Data Transfer Ports GPIB*1 Remote control and data transfer. (Conforms to IEEE-Std 488. 1, compatible with IEEE 488. 2 and SCPI-1999. 0) Ethernet Remote control and data transfer. (Conforms to IEEE (10/100/1000Base-T)*1 802. 3). RJ-45 Computer system and Windows XP Professional, 512 MB SDRAM, 20 GB peripherals removable Hard Drive at rear (available front mount kit), CD-RW/DVD drive at front, included USB compact keyboard and mouse PC I/O ports USB 2. 0 compliant ports (6 total, 2 front, 4 rear), PS/2 mouse and keyboard connectors (rear panel), RJ-45 Ethernet connector (rear panel) supports 10/100/1000Base-T, XGA out Display 10. 4 inch, LCD color display with touchscreen, 1024 (H) × 768 (V) (XGA) Power Supply 100 to 240 VAC, 47 to 63 Hz Power consumption 450 W Safety UL61010-1, CAN/CSA-22. 2, No. 61010-1-04, EN61010-1, IEC61010-1 Emissions EN 55011 (Class A), IEC61000-3-2, IEC61000-3-3 Immunity IEC61326, IEC61000-4-2/3/4/5/6/8/11 Regional Certifications Europe EN61326 Australia / AS/NZS 2064 New Zealand *1 Supported by MATLAB software through MATLAB Instrument Control Toolbox. Waveform File Import Capability Height Width Length Weight (approx. ) 245 465 500 kg 9. 6 18. 0 19. 7 lb. Net Net with Package Top and Bottom Side Rear 19 28 2 cm 15 cm 7. 5 cm 41. 9 61. 7 0. 8 in. [. . . ] Opt. M12 M02 M11 M01 Waveform Length Expansion 32 M point to 64 M point. 12 www. tektronix. com Arbitrary Waveform Generator -- AWG7102 · AWG7101 · AWG7052 · AWG7051 Recommended Accessories Accessory Order Warranty One-year parts and labor. Transition Time Converter 150 ps (10% to 90%) 250 ps (10% to 90%) 500 ps (10% to 90%) 1000 ps (10% to 90%) 2000 ps (10% to 90%) Pin Header SMA Cable 102 cm (40 in. ) 51 cm (20 in. ) Rackmount Kit: Rackmount Kit with instruction Front Removable HDD Bay: Front removable HDD kit Replacement Hard Disk: SATA disk assembly (no software installation) Documentation 015-0710-xx 015-0711-xx 015-0712-xx 015-0713-xx 015-0714-xx 012-1690-xx 012-1503-xx 016-1983-xx 016-1979-xx 065-0753-xx Product(s) are manufactured in ISO registered facilities. Product(s) complies with IEEE Standard 488. 1-1987, RS-232-C, and with Tektronix Standard Codes and Formats. Quick Start User Manual English Japanese Service Manual: English 071-1851-xx 071-1852-xx 071-1854-xx www. tektronix. com 13 Data Sheet Contact Tektronix: ASEAN / Australasia (65) 6356 3900 Austria +41 52 675 3777 Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Belgium 07 81 60166 Brazil +55 (11) 40669400 Canada 1 (800) 661-5625 Central East Europe, Ukraine, and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401 Finland +41 52 675 3777 France +33 (0) 1 69 86 81 81 Germany +49 (221) 94 77 400 Hong Kong (852) 2585-6688 India (91) 80-42922600 Italy +39 (02) 25086 1 Japan 81 (3) 6714-3010 Luxembourg +44 (0) 1344 392400 Mexico, Central/South America & Caribbean 52 (55) 54247900 Middle East, Asia, and North Africa +41 52 675 3777 The Netherlands 090 02 021797 Norway 800 16098 People's Republic of China 86 (10) 6235 1230 Poland +41 52 675 3777 Portugal 80 08 12370 Republic of Korea 82 (2) 6917-5000 Russia & CIS +7 (495) 7484900 South Africa +27 11 206 8360 Spain (+34) 901 988 054 Sweden 020 08 80371 Switzerland +41 52 675 3777 Taiwan 886 (2) 2722-9622 United Kingdom & Ireland +44 (0) 1344 392400 USA 1 (800) 426-2200 For other areas contact Tektronix, Inc at: 1 (503) 627-7111 Updated 30 October 2008 For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www. tektronix. com Copyright © Tektronix, Inc. and foreign patents, issued and pending. [. . . ]