User manual TELEFUNKEN BS100

[. . . ] When BS100 appears in the list of Bluetooth devices, select it. When your device asks for the pairing code, enter “0000”. Answer/End call: press the “Phone button” on your BS100 to both answer and end a call. [. . . ] Answer/End call: press the “Phone button” on your BS100 to both answer and end a call. Reject an incoming call: press the “Phone button” during 3 seconds. Redial last number: press the “Phone button” during 3 seconds when the BS100 is in stand-by mode. Voice activated dialing: it’s possible to make a call directly from the BS100 using voice recognition. To use this feature, your mobile phone must provide this option, and corresponding voice samples must have been recorded. Voice transfer: press and hold the “Phone Button” during 3 seconds when you’re in communication, until you hear a stone sound and then transfer to phone. If you need to transfer to speaker, use the same way. Troubleshooting: If you cannot connect the speaker to your phone, do as follows: - Ensure that the speaker is charged, switched on, paired with and connected to your phone. If the device is repaired or exchanged by our After-Sales Service, the warranty period is not extended. Exclusions: Damage or defects caused by the improper use or handling of the device, or by the use of accessories, which are not original or not recommended in these instructions, are not covered by the warranty. The warranty does not cover damage caused by outside elements, like lightning, water, or fire, or any other damage caused during transport. No warranty coverage may be claimed if the device’s serial number has been modified, removed, erased, or made illegible. No warranty coverage may be claimed if the device has been repaired, altered, or modified by the buyer or any repair personnel not officially qualified and authorized. The manufacturer does not guarantee the technical properties described in this manual. The hardware and accessories described in this manual are subject to change without advance notice. For this reason, the manufacturer reserves the right to change the related documents, components, options, and characteristics without advance notice. [. . . ] The hardware and accessories described in this manual are subject to change without advance notice. For this reason, the manufacturer reserves the right to change the related documents, components, options, and characteristics without advance notice. Compliance with current regulations: This device complies with current CE marking standards, and is compatible with the RoHS standard. [. . . ]