User manual TELEFUNKEN TF 501 COSI

[. . . ] (See setting procedure) MOON PHASE NEXT TIDE TIME NEXT TIDE HEIGHT TIDE DIRECTION GRAPH DATE TIME TIDE , DATE , TIME COMPASS MODE - This mode is only available in ULTIMATE OCEANSEARCH. The bottom half displays the compass in I-degree resolution and direction abbreviation. It’s in this mode you calibrate the compass and insert an offset for true north accuracy. (See setting procedure) MOON PHASE NEXT TIDE TIME NEXT TIDE HEIGHT DIRECTION COMPASS TIDE DIRECTION GRAPH TIDE MODE (WITH FUTURE TIDE PREDICTION) - In this mode you select and set your beach from the 200 preset locations, it will display tide information until Dec 2022. [. . . ] Eg: An airplane trip or long distance travel in a car or train. ALSO NOTE: After calibration, compass readings should be taken away from large metal objects and appliances. -HOLD MODE/SET in for 2 seconds to enter beach setting. -To toggle between REGIONS use START/STOP & LAP/RESET. when you find desired region press MODE/SET. -Use START/STOP & LAP/RESET to toggle through to your desired COUNTRY. -Use START/STOP & LAP/RESET to toggle to desired BEACH. - HOLD MODE/SET in for 2 seconds to save selected beach. -Once you set your beach you can use the START/STOP & LAP/RESET to toggle through all tide information for today as well as past and future tides. B B CUSTOMIZE A PRESET BEACH In the case where one of the 200 preset beaches isn’t your local beach you can CUSTOMIZE the tide data for any of the 200 preset beaches to match your beach. -Firstly, use the tide set procedure above to preset the beach closest to your beach. You can rename Spot X to your local beach name by following procedure below, or to leave the name as Spot X, simply HOLD MODE/SET in for 2 seconds to set and save all new Spot X information. -Or use START/STOP & LAP/RESET to scroll through the alphabet and change the selected letter. 10 Press MODE/SET to move to the next letter. -Once complete, HOLD MODE/SET in for 2 seconds to save all. NOTE: When Spot X is set no RANGE information will be displayed, only the time of the next tide and tide direction graph will be displayed. Spot X Beach Year (C) B Month B Day/Date Spot X Name Minute B Hour B B B go to the next character (wrap around after the 8th character) FUTURE TIDE SETTING If you want to know tide and moon information for a specific date in the future until December 2022 the FUTURE TIDE FUNCTION must be used. -Press MODE/SET to advance to TIDE MODE. Press START/STOP or LAP/RESET to toggle through tide data, one tide at a time, past or future, for the selected beach or use the procedure below for a distant future or past date. -HOLD START/STOP in for 2 seconds, the year will flash, press START/STOP & LAP/RESET to select the correct year. -Press MODE/SET the MONTH will flash in top left hand corner, press START/STOP or LAP/RESET to select the correct month. -Press MODE/SET the DATE will flash, press START/STOP & LAP/RESET to select the correct date. [. . . ] Eg : Frequent temperature changes, salt water and big wipeouts can diminish the longevity of the watches rubber seals. To keep your watch in peak condition for Surfing we recommend every 24 months you have your watch seals replaced and fully tested at the Rip Curl Watch Service Centre. Assumes no responsibility for any loss, or any claims by third parties that may arise through the use of this watch. 18 Rip Curl Watch Care Procedures • Only use your watch for approved sports as detailed on page 18. [. . . ]