User manual TELEFUNKEN TX 103

[. . . ] € Fit the drain hose into the discharge housing securely to prevent any water leakage and to allow machine to take in and discharge water as required. It is very important that the water intake and drain hoses are not folded, squeezed, or broken when the appliance is pushed into place after it is installed or cleaned. € Your washing machine is designed to continue operating in the event of a power interruption. Your machine will not resume its program when the power restores. [. . . ] For curtains and lace, the “Synthetic 40” program with pre-wash and anti-creasing functions selected is recommended. €Delicates You can wash your delicate clothes on this program. It has more sensitive washing movements and does not make intermediate spinning compared to “Synthetic” program. €Woolens You can wash your machine-washable woolen garments on this program. Wash by selecting the proper temperature according to the labels of your clothes. It is recommended to use appropriate detergents for woolens. €Hand Wash You can wash your woolen/delicate clothes that bear “not machine- washable” labels for which hand wash is recommended on this program. It washes the laundry with very tender washing movements without damaging your clothes. Additional programs For special cases, there are also extra programs available: C Additional programs may differ according to the model of your machine. € Baby Increased hygiene is provided by a longer heating period and an additional rinse cycle. It is recommended for baby clothes and clothes worn by allergic people. Quick wash This function can be used for cottons and synthetics programs. It decreases the washing times for lightly soiled laundries and also the number of rinsing steps. Press “Start/Pause/Cancel” button to start the program after making the new time delay selection. Starting the Program Press “Start/Pause/Cancel” button to start the program. €Start/Pause/Cancel” button will light up to indicate that the program has started. The door is locked and the “Ready” light fades. Progressing a program Progress of a running program is shown through the program follow-up indicator. At the beginning of every program step, the relevant indicator lamp will light up and light of the completed step will turn off. C If the machine is not spinning, the program may be in rinse hold mode or the automatic spin correction system might have been activated because of excessive unbalanced distribution of laundry in the machine. Changing the program after the program has started You can use this feature after your machine has started to wash different textile groups in the same batch of clothes under higher or lower temperatures. You must cancel the ongoing program in order to change the washing program. [. . . ] The automatic spin correction system might have been activated due to the unbalanced distribution of the laundry in the drum. It continuously The laundry in the drum may be clustered spins. there may be an imbalance (bundled laundry in a bag). Laundry should be Remaining time of laundry in the machine. [. . . ]