User manual TELTONIKA RUT104 HSUPA DATASHEET

[. . . ] All wireless devices for data transferring may be susceptible to interference, which could affect performance. The device is not water-resistant. Keep it dry. The device requires high 230V AC voltage. IMPORTANT NOTES!It is mandatory to read the notes and manual carefully before starting to use the device. 2 Teltonika © 2011, GSM Desktop Phone RUT104 HSUPA User Manual v1. 00 Table of contents 1 2 3 SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 21 4 5 6 7 8 9 3 Teltonika © 2011, GSM Desktop Phone RUT104 HSUPA User Manual v1. 00 1 SAFETY INFORMATION In this document you will be instructed how to use GSM Desktop Phone safely. We suggest you to adhere to following recommendations to avoid any damage to person or property. You have to be familiar with the safety requirements before starting to use the device!Device requires power supply source that satisfies all safety requirements listed in LST EN 60950-1 standard. Each power supply source should not exceed 15VA. Upgrade socket is used for device firmware upgrade. Only qualified personnel with proper equipment can upgrade the device. Do not mount or serve device during a thunderbolt. To disconnect power for the device please do the following: Plug off AC/DC power adapter from the wall outlet. To avoid mechanical damage of the device it is recommended to transport the device packed in damage-proof pack. Protection against over currents, short circuits and earth faults should be provided as a part of the building installation. Additional two pole protective device is required to protect from short-circuit and earth faults. Note: incoming call number is displayed on the LCD. The caller ID and call number is displayed on the LCD if the number is stored in the phone book. Note: If there are missed calls the icon "Ring" on the LCD screen is displayed. Number near the icon shows how many calls where missed. 4. 3 Ending calls To end a call place the handset back onto the cradle. 10 Teltonika © 2011, GSM Desktop Phone RUT104 HSUPA User Manual v1. 00 5 SMS GSM Desktop phone allows sending and receiving SMS text messages. Each SMS message can be up to 160 characters long. Contact your service provider to activate SMS service. 5. 1 Read SMS Read received message When a new message is received icon "Message" is displayed on the LCD screen. Read message from inbox Press the MENU key Select Messages and press OK Select Inbox and press OK Select message from the list by using arrow keys and press Read Reply to received Messages View the desired message Press Options Select Reply and press OK Type the text using number keypad and press Send Press Send again Forward text Message View the desired message Press Options Select Forward and press OK Add text using number keypad and press Send Enter the phone number or use Phone book to select an contact Press Send 5. 2 Send SMS Press SMS key Type the text using number keypad and press Send Enter the phone number or use a Phone book to select contact Press Send 5. 3 Delete SMS Press the MENU key Select Messages and press OK Select Inbox and press OK Select message from the list and press Read Press Options, select Delete and press OK 11 Teltonika © 2011, GSM Desktop Phone RUT104 HSUPA User Manual v1. 00 5. 4 Message Settings Message Center Press the MENU key Select Messages and press OK Select Message settings and press OK Select Service center by and press OK Enter the number that your service provider gave you and press OK Note: If the number is already entered, press OK. Message Lifetime Press the MENU key Select Messages and press OK Select Message settings and press OK Select Validity period and press OK Using arrow keys select preferred message lifetime and press OK Note: Message lifetime is the amount of time that an unread message will remain on the network server before being removed. 6 ADDITIONAL FEATURES 6. 1 Date and Time Settings Set the time Press the MENU key Select Settings and press OK Select Time and date and press OK Select Adjust time and press OK Set time by using number keypad or arrow keys and press OK Change the time format Press the MENU key Select Settings and press OK Select Time and date and press OK Select Time format, select preferred time format and press OK Set the date Press the MENU key Select Settings and press OK Select Time and date and press OK Select Adjust date and press OK Set date by using number keypad or arrow keys and press OK Change the date format Press the MENU key Select Settings and press OK Select Time and date and press OK Select Date settings and press OK Select Date format, select date format by using arrow keys and press OK 12 Teltonika © 2011, GSM Desktop Phone RUT104 HSUPA User Manual v1. 00 Turn date display on the LCD screen On/Off Press the MENU key Select Settings and press OK Select Time and date and press OK Select Date settings and press OK Select Show date, select ON or Off and press OK 6. 2 Address Book GSM desktop phone stores all contacts in the SIM card. Depending on the SIM card (SIM cards may have different memory capacities) phonebook is capable of storing up to 240 phone numbers with names. Note: To dial a number from the phonebook pick up the handset and press Phone book. Add new contact Press the MENU key Select Contacts and press OK Select New contact and press OK Enter name the by using number keypad and press OK Enter the number by using number keypad and press OK Note: To input the "+" character press and hold "0" key. [. . . ] to home country - do not allow international calls except to home country. All incoming - do not allow any incoming calls. Incoming when roaming - do not allow any incoming calls if rooming Disable all ­ disable all call barring features. Turn On/Off call barring feature Press the MENU key Select Settings and press OK Select Call services and press OK Select Call barring and press OK Select the desired barring type Using arrow keys select Enable/Disable and press OK 17 Teltonika © 2011, GSM Desktop Phone RUT104 HSUPA User Manual v1. 00 7. 3 Call Waiting Call Waiting enables notification of incoming calls when the RUT104 HSUPA is on call. [. . . ]