User manual TELTONIKA TVF110

[. . . ] Voice Fax User manual v1. 0 History Company was established on 15th of April 1998. company started with production of telecommunication devices. In 2001 company expanded its fields of activity by starting design and manufacturing of electronical systems for wireless data transfer. In 2002 contract of partnership and collaboration was signed with company ProSign GmbH (Germany), considering design and representation of graphic programming interface iCon-L in Eastern Europe. [. . . ] Phone call from mobile phone to phone using the Trunk mode 5. 2. 1. 1. 1. 3 Sending Fax call from Voice Fax to a Voice Fax or PSTN Fax. Insert sheets you want to send into fax device connected to the Voice Fax. Before phone number dial * and wait for the connection. Time period between two different digits can be no longer than 3 seconds (see chapter 6. 1. 4. ). If You enter phone number without asterisk * in the begining, voice call will be made. The blinking Mode LED will indicate that the call is in progress. To terminate the call, hang up the phone. ! Note: Making international phone call dial 00, instead of + 14 Voice Fax User Manual Picture 5. 3. 3. Sending Fax call from Voice Fax to a Voice Fax or PSTN Fax. 5. 2. 1. 1. 1. 4 Receiving Fax call from PSTN or Voice Fax to Voice Fax If incomming call is fax call the Voice Fax will answer automaticly as fax device after defined number of rings, default is 2. Voice Fax Mode LED will indicate that the call is in progress. Picture 5. 3. 4. Receiving Fax call from PSTN or Voice Fax to Voice Fax 15 Voice Fax User Manual ! Note: The fax data transmition is divided into two stages. Voice Fax receives fax data into internal memory and after reception is succsessfull it transmits data to localy connected or remote fax device. If device fails to transmit data it automaticly makes up to (default) three redials with (default) 30 second delays and if it fails, by default Voice Fax deletes fax data from internal FLASH memory. This function can be switched off so after unsuccessful number of tries fax data will stay in nmemory and will be possible to retry fax transmition by picking up handset and pressing # # # later or even after Voice Fax restart. It is possible that after succsessfull tranmition fax will print 3 same pages. This means that after fax page there was no confirmation and device automaticaly retried current page. If option , , Delete after tries" is switched off, unsuccessfull tranmition is indicated by LED's. To delete fax data from FLASH memory pick up the handset and press * * * alternatively every next fax session will overwrite previous fax data in the FLASH. If it is not possible to send or receive fax few times in a row it might be because of GSM network problems, please wait few minutes and try again. If device not responding please restart device by pressing reset buton on the bottom of the box. If by mistake wrong destination fax number is entered and Voice Fax have started dialing press *** to stop transmition. If *** will be pressed at the moment of dialing or at the pause between tries, calling will be terminated and data deleted from flash immediately. [. . . ] 0# Dial 1# to enable Answer as Fax function. ##1111#14# 1# 0# Dial 2# to disable Answer as Fax function. ##1111# 14# 2# 0# 6. 15 Turning on/off delete facsimile from memory after retries By default function is enabled. It means that after defined unsuccessful number of tries faximile message will be deleted from memory. [. . . ]