User manual TENDA W54P-W54P+

[. . . ] 12 3. 1. 3 Site Survey . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3. 1. 4 Profile Management . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3. 1. 5 Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Please insert the Wireless PCI Adapter into the PCI slot of your computer. 2. “Found New Hardware” system dialogue appears, and selects “Cancel” to use the included Setup Wizard for fast installation; of course, you also can select “Next” to install by manual. -5- W54P/W54P+ User Guide 3. Inert the included CD-ROM into the CD-ROM drive of your computer. (If not appear, double click the “Setup. exe” icon. ) -6- W54P/W54P+ User Guide 4. Click “Next” to start installing. 5. Click “Change…” to select the directory path, or click “Next”. -7- W54P/W54P+ User Guide 6. Select “OK” and “Next” in the following window. 7. During the installation, the following dialogue maybe appears. Click the “Continue Anyway” to continue. There is no security threat to your computer. -8- W54P/W54P+ User Guide 8. Click “Finish” to complete the installation. -9- W54P/W54P+ User Guide Chapter 3 Client Utility Interface The included client utility is for the W54P/W54P+ Wireless PCI Adapter management. If it does not appear, select “Start”—“All Programs” —“TENDA” —“ W54P/W54P+”, or click the shortcut on your PC’s desktop. Note: In the Windows XP, you can select the included W54P/W54P+ Windows XP Client internal Utility Interface or the to wireless application configure the device. There are two client utility applications in W54P/ W54P+: Station Mode and AP Mode. Note: In this utility interface, Station Mode (Client Mode) is the default access way. -10- W54P/W54P+ User Guide 3. 1 3. 1. 1 Station Mode Station Mode Topology In this mode, W54P/W54P+ serves as a client to receive the wireless signals to access the Internet. -11- W54P/W54P+ User Guide 3. 1. 2 Status In the Network Status window, it displays something on wireless adapter and wireless network’s status, including SSID, Authentication type, Encryption Type, IP address, subnet mask and gateway and so on. -12- W54P/W54P+ User Guide 3. 1. 3 Site Survey The Site Survey is used to scan the available wireless network around, showing the wireless network’s signal strength and other information which provides basis for you to access which wireless network. Connect: select one entry in the wireless network list and click the button to connect the device with the selected network. Refresh: rescan the wireless network around. -13- W54P/W54P+ User Guide 3. 1. 4 Profile Management This window saves the general wireless parameters for different profiles, which is used to fast connect the wireless network you need. UP/DOWN: To change the profile’s sequence in the list. New: To create a new profile and configure the site status and security setting. Delete: To delete one existing profile. -14- W54P/W54P+ User Guide (Site Status) (Security Setting) -15- W54P/W54P+ User Guide 3. 1. 5 Statistics Statistics is used to summarize Rx and Tx data packets, including the success and error packet amount. Clear: click this button to renew the statistics. 3. 1. 6 WPS Setting WPS setting is enabled only on WPS-compliant devices. -16- W54P/W54P+ User Guide PIN： Enter the Pin code and click the “PIN” to automatically connect the wireless adapter with wireless devices around. PBC： Click the “PBC” to complete auto-check and connections between wireless adapter and other wireless device. Rescan: to rescan the WPS-compliant wireless network around. [. . . ] 802. 11b An extension to 802. 11 WLAN standard that provides up to 11 Mbps transmission in the 2. 4 GHz ISM radio band. 802. 11g An extension to 802. 11 WLAN standard that provides up to 54 Mbps transmission in the 2. 4 GHz ISM radio band. 802. 11b uses OFDM modulation and is backwards compatible with 802. 11b. [. . . ]