User manual TERRATEC AUREON7.1 SPACE

[. . . ] English Manual Version 01. 12. 02 CE Declaration We: TerraTec Electronic GmbH, Herrenpfad 38, D-41334 Nettetal, Germany hereby declare that the product: SoundSystem Aureon 7. 1 Space to which this declaration refers is in compliance with the following standards or standardizing documents: 1. EN 55024 The following are the stipulated operating and environmental conditions for said compliance: residential, business and commercial environments and small-company environments. This declaration is based on: Test report(s) of the EMC testing laboratory The information in this document is subject to change without notice and shall not be deemed as a warranty by the seller. No warranties, express or implied, are made with regard to the quality, suitability or accuracy of this document. [. . . ] Nothing else should be required at this time. If contrary to all 22 SoundSystem Aureon 7. 1 Space (English) expectations a request should appear for you to perform some action and you are not sure about it, then pressing the Enter key is generally a safe action. If Windows requests a second driver file, please refer to the aforementioned directory on the Aureon 7. 1 Space CD-ROM. Once the drivers have been installed successfully, install the ControlPanel via the autostarter, then the bundled software. To do so, execute <CD>:\autorun. exe Follow the instructions of the individual installation programs, and there's not really a lot that can go wrong. A particular software can also easily be removed from your system. For this purpose, call up "Control Panel -> Software" and locate the programs to be removed. Select the various programs and click "Add/Remove Programs. . . ". Installed drivers should look like this. After a successful driver installation, you should verify the correct condition of your Windows XP system. The Device Manager presents an overview of installed and recognized hardware components of your computer. The Device Manager can be found on the Control Panel under "System" > "Hardware". Then click the "Device Manager" button. If everything is correctly set up, the window should look like this. The figure shows the expanded view of the "Sound, video and game controllers" branch. To obtain this view, simply click the "+" symbol on the left side. SoundSystem Aureon 7. 1 Space (English) 23 The connections and their uses. After the successful installation of your sound card, we are now coming to the most important part: the connection of external devices and appropriate software settings for the devices. When connecting analog devices, ensure that the power is off to protect your speakers and your hearing from sudden peaks. For digital devices, be sure to at least reduce the volume of your playback equipment. Overview. The SoundSystem Aureon 7. 1 Space is blessed with a wealth of internal and external connection options. We would like to introduce them to you briefly below: Internal, onboard: CD audio, AUX and TTL. The PC board of the Aureon 7. 1 Space features three plug connectors for analog connections to CD-ROM drives (CD1 and CD2), or other cards such as TV or video expansion modules (AUX). The required cables and plugs are standardized and are generally included with branded products. An internal digital input is also available. An external S/PDIF signal with a so-called TTL level (+5 V), as provided by most CD-ROM drives, can be applied to the connector marked CN11. [. . . ] Analog In sends the signal of the analog source you have selected in the "Record" window. Wave Playback delivers the signal output of an audio application directly to the digital output. This setting is necessary to transfer audio data or raw data such as an AC-3 or DTS stream. The audio signal is "bit-true". [. . . ]