User manual TERRATEC CAMEO CONVERT800

[. . . ] English Manual (Hardware) Version: 17. 06. 04 CE Declaration We: TerraTec Electronic GmbH, Herrenpfad 38, D-41334 Nettetal, Germany hereby declare that the product: Cameo Convert to which this declaration refers is in compliance with the following standards or standardizing documents: 1. EN 61558 The following are the stipulated operating and environmental conditions for said compliance: residential, business and commercial environments and small-company environments. This declaration is based on: Test report(s) of the EMC testing laboratory The information in this document is subject to change without notice and shall not be deemed as a warranty by the seller. No warranties, express or implied, are made with regard to the quality, suitability or accuracy of this document. [. . . ] Final regulation TerraTec Electronic GmbH reserves the right to change or supplement the general terms and conditions of service at any time. Otherwise the General Terms and Conditions of Business of TerraTec Electronic GmbH are considered to be accepted. 12 CameoConvert (English) Glossary AVI--A Windows video format. Bit rate--The bit rate indicates the volume of the data stream per second. A higher bit rate results in higher quality. A distinction is made between constant bit rates (e. g. for -> VCD) and variable bit rates, e. g. Unlike constant bit rates, variable bit rates adjust the size of the data stream according to the video material. Blue screen--A variation of -> Chroma keying Capture--Recording. Chroma keying--Chroma keying uses a surface with a single color in front of which an actor, for example, is filmed. This color area is then made transparent during subsequent editing and can be replaced by a different background. Chrominance--Chrominance refers to the color signal in -> YUV, which is comprised of two color components: U, the balance between red and cyan, and V, the balance between yellow and blue. Composite video--Composite video is a transmission method common in the consumer sector that is generally realized using cinch connectors and which is frequently used, for example, on TVs. In this process, all signals (chrominance and luminance) share a single cable. The quality of composite video is lower than that of -> S video, in which chrominance and luminance are transferred separately. The part of your computer (processor, e. g. Pentium or Athlon), that does the actual computing. D8--Digital 8 is the successor to the Hi8 and VHS-C camcorder formats. Hi8 or D8 cassettes are still used, but the video data is recorded digitally in DV format. Data throughput--see Data transfer rate Data transfer rate--The data transfer rate describes the speed at which a hard drive can read or write data over a sustained period. The data transfer rate is usually measured in seconds, e. g. Device control--In DV terms, this refers to the ability to control your camcorder from your PC. CameoConvert (English) 13 DirectDraw--DirectDraw is a graphics standard initiated by Microsoft. Its features include the capability to write graphics data directly to the memory of the graphics board for the fluid display of video material. Dropped frames--These are individual images missing from the video data stream, usually due to a slow hard drive. The DV standard uses a compression rate of 5:1. This corresponds to a data rate of 3. 125 Mbps, which can be handled by virtually any modern hard drive. [. . . ] S video--Unlike -> composite video, chrominance and luminance are transmitted separately in S video, resulting in higher quality. Saturation--Describes the ratio of color in the picture. SECAM--SECAM is the third video standard like PAL and NTSC. Today it is used only in France and a number of Eastern countries. [. . . ]