User manual THEBEN RAM 701

[. . . ] Depending on switching frequency, you must change the batteries after approx. First time of operation: New batteries are included at the time of packing 1. LED 3 flashes Change the old batteries within 3 weeks. [. . . ] LED 3 flashes Change the old batteries within 3 weeks. The LED is illuminated after this for a few days continuously Afterwards the clock stops, the heating switches on continuously, but is not controlled. Use only new similar type alkaline cells LR6 4. 00 hours normal program r Push all segments from 600 hours to 7. 45 hours inwards, from 800 hours outwards Push the red tappet onto 600 hours Push the blue tappet onto 800 hours Product tpye RAM 701 can be switchted from day to week program or vice versa. -> Turn the big hand until the groove in the blue and the groove in the green ring cover each other. Example for weekprogram: mo - fr: 4 AM - 8 AM + 4 PM - 8PM/ sa: 8 AM - mid-night / su: 8 AM - 20 PM finish energiesafeingprogram r start comfortprogram m finish comfortprogram m start energiesafeingprogram r Insert alternate mo (I) to fr (V): a red tappet at 4 AM and a blue tappet at 8 AM a red tappet at 4 PM and a blue tappet at 20 PM a red tappet at 8 AM and a blue tappet at mid-night a red tappet at 8 AM and a blue tappet at 8 PM The tappets must be pressed down until the boss engages Only for qualified electricien The connection and the installation of electrical products may be effected only by a qualified electrician. If clock thermostats are used in a lay-out with other products, attention must be given to ensure that the whole system does not cause radio interference. The connecting * leads must conform to national regulations. Operation of the pump protection program Because the heating system is switched off in the summer months, the circulation pump can seize up. Per day even in the summer months, if a red tappet (RAM 701) or a depressed switching segment (RAM 701 s) runs through the switching status display 2. Activation of the pump protection program Cut the blue wire bridge on the back of the product. Environmental information The equipment that you bought has required the extraction and use of natural resources for its production. It may content hazardous substances for the health and the environment. In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems. Those systems will reuse or recycle most of the materials of your end life equipment in a sound way. [. . . ] It may content hazardous substances for the health and the environment. In order to avoid the dissemination of those substances in our environment and to diminish the pressure on the natural resources, we encourage you to use the appropriate take-back systems. Those systems will reuse or recycle most of the materials of your end life equipment in a sound way. [. . . ]